Although the Epson printer is known for its best performance and durability, it is not free from recurring glitches. Epson printer error 0xf3 is an error that users frequently encounter. You may get this special error code when an unknown object is trapped inside the printer.
The printer stops suddenly when you come across this particular error.
By any chance, if you are also facing the same issue then it is very important for you to solve it. Keeping this in mind, we are going to discuss about some of the most effective hacks that will help you eliminate the error code from your device. So, go through the whole article and learn the hack.
Also Read:: Canon b200 Error
Possible cause for Epson printer error code 0xf3
There are several reasons that are responsible for getting this problem in your printer. Some of them are briefly mentioned in this section. Have a look at the possible factors that may be causing the mess.
- If you are using poor or weak connectivity, it is possible to get the problem as well.
- If paper gets stuck in the paper feed, the Epson printer error 0xf3 appears on the screen.
- Paper jams are the major reason for which you may face this issue.
- If the ink cartridge is not filled with the appropriate ink or it has insufficient ink then the printer will not print normally and cause problems.
- When you are trying to print a lot of documents, the printer fails to scan them. As a result, it cannot proceed with the printing process and the error also leads to 0xf3.
- If the Epson printer does not have enough pages, you may also encounter this particular problem.
Epson printer error 0xf3 possible symptoms
In this section, you will find some common symptoms that may be responsible for this error.
- The " error code 0xf3" continuously appears on the Device you are using.
- Crashes the running program of the printer
- Your Epson printer does not print anything.
- Your device may be slow and will not connect to the printer.
Easy Methods To Resolve Epson Printer Error Code 0xf3
You need to go through the following steps very carefully and execute them as described below.
Method 1: Check Your Epson Printer
This is the basic method by which you can solve the problem immediately. To do this, first, you need to turn off your printer and separate the ink cartridge from it. If connected, you should also remove the rear parts such as USB, pen drive, hard disk etc. Now, take off the ink level of the printer and remove the panel screw from it. Next, you need to clean the inner area with a dry piece of cotton swab. It will help remove the dirt accumulated in it. After that, reinsert the parts back to their respective locations. Now, turn on the printer and print a page. Check whether the problem is resolved or still visible on the screen.
Method 2: Check Ink Levels
If you do not have enough ink in the printer, the Epson printer error code 0xf3 will bother you. Therefore, fix this and resolve your issue without any delay. The first thing you need to do is switch to your printer. Then, press the Start button and choose Control Panel. After that, double-click on it and select the "Printer and Fax" option. Then, you have to right click on the icon "Priority". Now, select the service option and choose "Serve this device". By this process, the toolbox will open on the screen and you need to select "Estimated ink level" by tapping on it. The color and ink level of the cartridge will be displayed on the screen. Finally, select your preferred ink level and check if the error still occurred. But if you cannot see the level then you need to fill the ink cartridge properly.
Method 3: Reset Your Epson Printer
To do this fix first, you must disconnect all the power links from the back side of the printer and the outlet of the divider. Until that time make sure the printer is "switched on". After that, separate the various links with USB, pen drive etc. from the printer. Then, tap and hold the printer's energy hold for about 15 seconds. Ensure that the printer is validly connected to the divider outlet and not the surge, protector. Finally, attach the power link and print a page.
Method 4: Perform The Print Cartridge Utility
If the above methods are not sufficient to resolve the error, try this as an alternative. First, switch on your device and connect properly to your computer. Then, press the Windows Start button and choose Control Panel. Now, select the Printer and Fax folder by double-clicking on it. Next, right-click on the Preferences icon and tap on Services and then tap the icon "Serve this device". Now from the Toolbox tab select the option "Clear the print cartridge" and click on it. Finally, restart your device and check if the Epson error code 0xf3 is finally resolved.
Hopefully, by performing the above steps, you will completely erase the error from your device. But in any case, if you find any difficulty in doing so, do not hesitate to share your feedback.
