Monday, February 15, 2021

Flashing Error LED? Brother Printer Error Light | Dial 817 442 6637

 Users of Brother Printer, at times, are perturbed by the flashing lights in the printer. This is one of the prevalent error codes and usually comes forth when the drum counter isn’t installed in the correct orientation or place. If you are rattled by the brother printer error light issue, you can take a sigh of relief! This article provides some expeditious methods to sort this error.



Brother troubleshooting steps to fix flashing lights error

The 2 quick and easy solutions to solve this glitch are as follows.

Resetting the drum

  1. Dismount the cartridge and drum unit.
  2. Halt for at least 10 seconds.
  3. Place the drum unit and cartridge in their accurate position.
  4. If the drum LED flashes, it indicates that the drum printer hasn’t been reset.
  5. Tap and hold the Go button, until all 4 LEDs light up.
  6. Once they illuminate, you could let go of the Go button.
  7. Close the cover and voila, your drum unit is reset.
Also Read:: Brother Printer Not Printing

Inspecting the printer unit

The Brother printer all lights flashing glitch could also step because of fault cartridges or some other hardware glitch. Inspect whether all cables are connected properly. Also, ensure that the drivers are up-to-date. You could also try to reset the cartridges as follows:

  • Unbolt the top panel, unlatch the cartridge lock chips, and remove them carefully.
  • Halt for a minute.
  • Set one cartridge at a time inside and close the printer.
  • Try a demo print. If the error subsidies, insert the other cartridge as well.
  • Close the printer and your printer shall function properly.

Still, facing an issue?

If the methods stated above didn’t fix the brother printer error light, fret not. You can dial our Brother printer customer Support and leave your worries on us. Our experts shall confer instructive advice that shall resolve your issue.

Monday, February 8, 2021

A Complete Guide To Fix Canon Printer Error 5b00 - Dial 817 442 6637

 The Canon printer error 5b00 is one of the most pervasive errors bugging Canon printer users. when encountering this error, the printer shall boot normally, but all the printing and scanning operations shall halt. This error usually alludes to the faulty usage of ink cartridges.

Canon Printer Error 5b00


If the error code 5b00 is disrupting your printing operations and want a quick and easy fix to this error, you are at the right place. This blog provides a quick and easy solution to fix this issue.

How to fix Canon printer error 5b00?

1) Resetting the waste ink counter

The Canon printer 5b00 error usually occurs due to ink spills and can be resolved by resetting the printer. To implement this step simply and unfasten all the connections to and from the printer. turn off the printer and open the cartridge door. Press and hold the power button while plugging in the various cords. Once all lights are lit up, you can release the button. Double press the power button and wait till the green light stabilizes. Close the cartridge door and voila, you are all set to use your printer.

Also read:: Brother printer error light

If the canon error 5b00 continues, you could execute the second method.

2) Cleansing the waste ink pad manually

Open the ink cartridge segment of your printer and dismantle the power cord of the printer. Carefully remove the cartridges. Locate a tiny square part resembling a foam pad.  It is situated behind the white rollers. Gently pull out the pad and using a clean soft towel wipe it clean. Set it again, followed by installing the cartridges. Press and hold the power button, while fastening the power cord. After halting for 5 seconds, tap the power button again to reset the internal memory and rectify the 5b00 error of the canon printer.

If the above Canon Printer troubleshooting procedures weren’t that efficacious, fret not. Our team of experts has got it covered.

Simply dial our Canon Printer support number (817) 442-6637 and leave your printer error on us to fix it. I hope this blog was helpful. 

Monday, February 1, 2021

2 quick Solutions to Fix Brother Printer Error Light and Flashing Error LED

 Users of Brother Printer, at times, are perturbed by the flashing lights in the printer. This is one of the prevalent error codes and usually comes forth when the drum counter isn’t installed in the correct orientation or place. If you are rattled by the brother printer error light and brother Flashing Error LED issue, you can take a sigh of relief! This article provides some expeditious methods to sort this error.



Brother printer troubleshooting steps to fix flashing lights error

The 2 quick and easy solutions to solve this glitch are as follows.

Resetting the drum

  1. Dismount the cartridge and drum unit.
  2. Halt for at least 10 seconds.
  3. Place the drum unit and cartridge in their accurate position.
  4. If the drum LED flashes, it indicates that the drum printer hasn’t been reset.
  5. Tap and hold the Go button, until all 4 LEDs light up.
  6. Once they illuminate, you could let go of the Go button.
  7. Close the cover and voila, your drum unit is reset.
Also Read:: Brother Printer Not Printing

Inspecting the printer unit

The Brother printer all lights flashing glitch could also step because of fault cartridges or some other hardware glitch. Inspect whether all cables are connected properly. Also, ensure that the brother printer drivers are up-to-date. You could also try to reset the cartridges as follows:

  • Unbolt the top panel, unlatch the cartridge lock chips, and remove them carefully.
  • Halt for a minute.
  • Set one cartridge at a time inside and close the printer.
  • Try a demo print. If the error subsidies, insert the other cartridge as well.
  • Close the printer and your printer shall function properly.

Still, facing an issue?

If the methods stated above didn’t fix the brother printer error light, fret not. You can dial our Brother printer customer support and leave your worries on us. Our experts shall confer instructive advice that shall resolve your issue.

Monday, January 25, 2021

Use This 8 Great Steps To Fix HP Printer Cartridges Error

 The printer not recognizing a cartridge is a very common issue faced by users. Printer cartridges need to be replaced whenever the level of ink is low or when the installed cartridges are faulty. Also, a lot of troubleshooting methods include the ink cartridge replacement as a potential solution. If you are facing an HP Printer Not Recognising Compatible Cartridges error and need insights about it, you are in the right place. This blog throws light on how to resolve a compatible cartridge error.

HP Printer Not Recognising Compatible Cartridges


Compatible cartridges can be defined as any cartridge that is authentic and manufactured by original manufacturers. At times even when you install an authentic cartridge, still, it wouldn’t be recognized by the printers.

Also Read:: Epson Printer Wont Print error

Reasons why HP printer cartridge error occurs:

Some reasons why this printer error happens is because:

  1. When the internal memory isn’t restored.
  2. The protective strips are taken out.
  3. The chip is injured
  4. HP cartridges protective sheet not removed
  5. Ink cartridges installed in inaccurate slots.

 HP printer troubleshooting Steps how to override HP printer cartridge error:

The primary reason why an authentic cartridge is deemed incompatible is due to a problem in resetting the internal memory. To reset the internal memory you can do as follows:

  1. Pull out the new cartridges and place the old ones in their slot. Leave it there for 10 minutes.
  2. Substitute the old cartridges with new ones. Doing till step shall resolve this error. If the issue exists, follow the next steps.
  3. Detach the cartridges.
  4. Switch off the printer.
  5. Unplug the power cord from the outlet. Leave the printer in this state for ten minutes.
  6. Connect the power cord to the outlet.
  7. Lodge the cartridges in the correct slot.
  8. Press the power button to switch on the printer.

The above-mentioned steps shall be beneficial to resolve how to override the hp printer cartridge error as well. Simply follow the above steps to replace the empty cartridges and in case of error, follow them.

If there is an issue that persists, do not hesitate to dial our HP printer helpline number. I hope this article helps!

Monday, January 18, 2021

Dial-(817) 442-6637 To Fix Epson Printer Won’t Print error

 You are in midst of an important printing operation and due to no apparent reason, the Epson won’t print. This scenario can be highly vexing. If you want to find a retort to this issue, you are in the right place. This article enlists 3 easy steps that could fix your issue.



Before starting with the steps, it is recommended to check for any error messages on the LCD screen of the printer. The error code could elucidate the reason behind the Epson printer not printing.

3 easy methods to resolve Epson printer not printing correctly

Method 1: Ensuring there are firm connections

If you are using a wireless printer, verify that the printer is well connected to the Wi-Fi. Try disconnecting from the Wi-Fi and re-establishing the connection. Confirm whether the system and printer are connected to the same network; if not tether them to the same network. While using a printer that has USB ports, ensure that all the cables are operating adequately. Also cross-check whether the cords are established.

Also Read:: Canon Printer Not Printing Color

 Method 2: Assign the printer as the default printer

At times the printer not printing issue could stem due to the Epson printer not being set as the default printer. To make it the default printer, press Start, followed by Settings, and click on Devices. Select Printers and Scanners. Choose the Epson printer > Manage > Set as default.

Method 3: Inspecting the ink cartridges

Press Start > Settings > Devices. Select Printers and scanners. Right-click on the current Epson printer you are using and choose Printing preferences. Navigate to the Maintenance tab and tap on Epson Status Monitor 3. In this window, you shall be prompted whether the cartridges need replacement.

The above 3 mentioned steps shall be beneficial to resolve this issue. However, if any step seems ambiguous or non-beneficial it is recommended to reach out to us on our Epson Printer Tech Support Number. Our delegates have experience in this field and can resolve your issues with ease.   

Monday, January 11, 2021

Canon Printer Not Printing Color? Solution Here - (817) 442-6637

Canon is a Japanese MNC manufacturing prime quality products related to the optical and imaging sector. Canon has lodged its name in the printing devices as one of the best printer brands. Every device due to some unexpected causes can encounter an issue. One prevalent error faced by Canon printer users is Canon Printer Not Printing Color. This blog provides 4 easy methods to fix this error code.



Why is the Canon Printer Not Printing?

Some primary radix why colors are not printed by the printer include:

  • Obsolete printer drivers
  • Ink levels in cartridges are low
  • Error in Canon printer setup
  • Incompatible ink cartridges
  •  The faulty connection between the system and the printer

If you are confused what to do next, you are at the right place. This blog provides comprehensive Canon printer troubleshooting procedures to fix “Color not printed by Canon Printer” issue.

How To Fix Canon Printer Not Printing Color?

Method 1: Inspect the level of ink in the cartridges

Due to the low levels of ink in the color cartridges, the printer may not be printing the colors. To fix this problem, do as follows:

  • Open the printer and with caution remove the ink cartridges.
  • Scrutinize the level of ink in the cartridges.
  • If the ink quantity is low, replace the cartridges with new ones.
  • Set them again and try a demo print.
Also Read:: Brother Printer Not Printing


Method 2: Check the printing settings

At times, the color printing option is not enabled, because of which this issue might stem. To edit the color printing settings, do as follows:

  • Press Start > Settings
  • Visit “Printers and Scanners” and right-click on the printer you are using.
  • Select Properties. Confirm whether color printing is enabled. If not, enable it and save the changes.

Method 3: Printer driver update

Printer drivers formulate a link between the printer and the system, and hence, play an important role. To ensure the proper functioning of the driver, either update the driver or install the new drivers from the official website of Canon.

Method 4: Perform a power cycle

Try switching off your printer and dismantle all the cords of the printer. Switch it on and fasten all the cords. Give a print command to check whether the issue is resolved.

Dial Canon Printer Toll-Free Number to resolve all issues

The above-mentioned methods can resolve the issue, however, if the issue persists dial the Canon printer customer number. Our delegates shall guide you through and fix all your Canon printer issues.  

Monday, January 4, 2021

Brother Printer Not Printing? Solution Here (817) 442-6637

 Giving a print command from the PC to the printer is one of the most common ways to give print command. At times due to some glitch, the printer wouldn’t receive the command which as a result would delay the printing operations.  This blog provides some easy and quick fixes to Brother printer not printing issue.



Why is my Brother printer not printing?

There a plethora of reasons why the Brother printer won’t print. Some prevalent reasons for this Brother printer problems are:

  • Paper jam
  • Hardware error
  • Obsolete printer drivers
  • Issue in cartridges

How To fix Brother printer not printing

Solution 1: Verifying whether there is an adequate Power supply

  • If there is a LED light glowing adjacent to the power supply option, it means the printer is receiving an active power supply.
  • If the LED light isn’t glowing, it could mean the printer isn’t receiving an adequate power supply.
  • However, if the printer is receiving an active power supply and still not printing, you might get an error prompt. The error code would further delineate whether the problem is with paper jam or ink cartridges.
Also Read::Canon mx922 error code c000

Solution 2: Confirm there is a connection between the printer and PC

  • Ensure there is a firm connection between the printer and the PC.
  • By opening the devices and printers in the Control Panel window on your PC, locate the Brother printer you are using.
  • Check its status. Try setting the printer as your default printer.
  • While making use of a wireless connection, ensure your printer is in the vicinity of the connection and receiving adequate network strength.

Solution 3: Ensure the printer drivers are up to date

  • Download the updated drivers either from the official Brother printer website.
  • You could also update it by visiting the drivers utility window in your system.

Solution 4: Cold Reset

  • Cold reset is the process by which the initial settings of the printer are restored. Before implementing it, it is suggested to make a back-up of the printer memory.
  • Resting the printer in its former state may resolve the issue.

The above-mentioned fixes are some quick and easy retorts to resolve the issue. In case your issue persists or you are stuck somewhere, it is advisable to seek our Brother Printer Support. You could receive expert advice from our team which works 24×7 to provide the best solutions to our customers.

Monday, December 28, 2020

☝Canon mx922 error code c000 Solution - Call 8063917809

 Canon Printer Error C000 is one of the common error codes faced by Canon printers,  especially the Pixma series, users all across the globe. Canon mx922 error code c000 usually stems because of some internal issue.  Encountering the issue can be highly infuriating as it hinders all printing operations and various other secondary functionalities as well.

Canon mx922 error code c000


Several methods could mitigate the canon mx922 error c000 and this article provides some simple and quick methods that could be adopted to resolve the canon error code.

How to fix canon mx922 error code c000?

Solution 1: Ensure the packing material has been removed

  • If the Canon c000 error sprouts in the initial printing operations, a high probability of this error emerging could be because of any stuck packing material. 
  • To check the same, open the printer cover, and inspect whether any stuck material like polystyrene or tape is there. If you find some jammed material, remove it carefully and close the cover.
Also Read:: Resolve Epson Printer Error Code E01

Solution 2: Verify ink cartridges are set in the correct orientation

  • Another reason for error code Canon C000 could be the faulty setting of cartridges.
  • Simply unmount the cartridges and set them again.

Solution 3: Confirm the level of ink in cartridges are sufficient

  • Carefully remove the cartridges from the printer and inspect the ink level in them.
  • If any cartridge is empty, replace them with new ones and check whether the problem has been resolved.

Solution 4: Remove all alien objects

  • Canon printer paper jam is another issue why this error code is displayed.
  • An easy and quick fix to resolve this glitch is to simply open the printer and inspect for any paper jams.
  • Check whether there are any foreign objects and also ensure the path of the paper feeder is free.

Solution 5: Reset the printer

  • If none of the above-mentioned procedures work, resetting the printer may do the job.
  • Turn off the printer and remove the power cord from the outlet.
  • After waiting for 5 minutes, plug in the power cord, and switch on the printer.
  • A point to note is that resetting the printer shall remove the faxes stowed in the memory.

If neither of the solutions works, it is suggested to reach out to us Canon Printer Customer Service. Our representative shall guide you and fix the issue.

Monday, December 21, 2020

Epson Printer Error Code E01 Solution to Fix | 8063917809

 Epson Printer Error Code E01 is one of the standard issues that clients encounter. This glitch ends the printing activities and as a rule, stems during the introduction cycle. This article gives an exhaustive answer to fix this Epson printer error code.



A few reasons why this Error happens is as per the following:

•             Loose USB associations or power cord

•             The position of the CD plate gets disturbed

•             The printer transportation locking measure becomes faulty

•             Printer drivers become obsolete

•             CISS establishment in the printers

Also Read::Some common HP printer errors and how to fix them

How to Fix Epson Printer Error E-01?

Some guaranteed methods to resolve Epson Printer Error Code E0-1 are as following:

1.            Power Cycle

  • Turn off the printer and wait for 5 minutes.
  • Once the time is over, restart the printer. Go through the initialization cycle and check whether the blunder code has been removed. If the Epson printer issue continues, follow the next steps.

2.            Double check the lock of the printer

Guarantee that the transportation lock of the printer has been eliminated. Handling the transportation lock is an effective technique to end this issue.

3.            Examining the CD plate of the printer

Affirm the CD plate isn’t out and the direction of the plate is precise. When you guarantee the orientation of the CD plate is accurate, restart the printer to affirm the issue has been settled.

4.            Monitor the Cartridge 

If CISS is introduced in your printer, inspect whether the cartridges are allowed to move right and left. Additionally, check for any stuck bits of paper and confirm the ink level in the cartridges are adequate.

5.            Printer check-up

Examine all the pieces of the printer and whether or not CISS is introduced. Confirm the hardware of the printer doesn’t have a fault. In case CISS is introduced, odds are it is preventing the mechanism of the cartridges and causing Epson Printer Error E-01. In such a situation, supplant the cartridges with authentic Epson printer cartridges. Also, you could evoke the Epson printer Troubleshooting option; once the scan is over, simply tap Fix.  

The previously mentioned steps are some simple and compelling techniques to moderate Epson Printer Error Code E0-1. The strategies will be adequate to fix the issue. If the error persists, don’t hesitate to reach out to our Epson Support team and discover solutions to all your printer related errors.

Sunday, December 13, 2020

Check These HP printer errors and how to fix them

The Hewlett-Packard Company, commonly known as HP, needs no introduction. Time and again HP has established itself among the top-notch brands in the field of development and manufacture of hardware as well as software along with providing services. One product of HP that is loved by customers across the globe is its range of printers. Making use of some advanced technology along with making it affordable are two prime factors why it is a hit among global customers. Like all technological devices may incur some glitch, so can HP printers. But no need to fret; the good news is that major issues can be resolved by following some simple steps. This article talks about some common HP printer errors and how to fix them.


HP Printer Paper jam

HP printer paper jam is one of the errors that users may happen to encounter throughout their usage.

Fix:

  1. Turn off the printer.
  2. Carefully open the printer head.
  3. Find the stuck bits of paper and carefully remove them.
  4. Close the printer head and switch it on.
Also Read::Easy And Quick Solutions To How To Fix HP Printer Errors

HP Printer not printing

This issue could stem from a majority of underlying issues. Some easy fixes to resolve HP printer, not printing issue are as follows:

  1. Check whether the printer is set as default
  2. Ensure the printer is getting an adequate power supply and is well connected to the printer as well as the Wi-Fi network.
  3. Update the driver.
  4. Verify whether the ink cartridges are installed properly and have a sufficient level of ink in them.
  5. Try HP printer troubleshooting. Once the scan is over it would state the issue, simply click “Fix”.

HP printer won’t print black

This error could allude to an issue in the cartridge, printer head, or software/driver.

Fix:

  1. Try cleaning the printer head using warm water and a tissue roll.
  2. Check the level of ink in cartridges.
  3. Try changing the printer settings as it may trigger the printer to start printing.
  4. Ensure the tape in the cartridge has been pulled out.

hp printer error code

Although HP printer error code could mean various other things, it is suggested to do as follows to tackle the majority of the error codes.

Fix:

  1. Try resetting the printer. To do so, turn off the printer.
  2. Detach all USB cables as well as power supply cables.
  3. Wait for 5 seconds.
  4. Press and hold the power button for 5 seconds.
  5. Connect the power supply as well as the USB cables.
  6. Confirm whether the error code has been mitigated, if not, simply reach out to our hp printer support number.

HP printer not printing color

This issue is similar to the error of the HP printer not printing black. Try to implement the fixes mentioned there and check whether the issue has been resolved. You could even invoke the HP printer troubleshooting option to detect and fix the issue.

The above mentioned are some common errors and how to fix them. It is advisable that if you happen to encounter any kind of issue and the above-mentioned procedure doesn’t seem efficacious, reach out to us by dialing our hp printer support number.

Tuesday, December 8, 2020

Easiest Way To Resolve Brother Printer In Error State

 Brother printers are one of the popular choices among users owing to its fine technology and affordability.  However while using them, users encounter a message ” Brother Printer in Error State” which can hamper the printing operation. If you happen to encounter a similar issue and need assistance to resolve it, then you are in the right place.



Reasons why Brother Printer in Error State emerges?

Some of the common reasons why the printer in error state pops up are as follows:

  1. BIOS glitch
  2. A malware or virus attack
  3. Drivers get corrupted
  4. Connectivity issue
  5. Unfastened or loose wires or USB
  6. A glitch in system files
  7. The drivers are not updated

If you encounter this issue, don’t worry. Given below are some Brother printer troubleshooting steps that can help resolve this issue.

How to resolve this Brother printer error?

Step 1:

The first and foremost step is to ensure your printer is getting an adequate power supply. Next, ensure the printer is well connected to the computer as well as is getting a strong Wi-Fi network.

Also Read: How To Fix Canon Printer Error b203

Step 2: Reconnect to the network

  1. If making use of a LAN cable, confirm whether the connection is firm.
  2. If using a wireless network, disconnect the printer and try to re-establish the connection.
  3. Turn off the printer and switch it on again to check whether the Brother printer error has disappeared.

Step 3: Resolve Parallel Port Settings

Usually, when Windows are updated, the parallel port settings can be altered resulting in this error. To fix the parallel port settings, do as follows:

  1. Navigate to Device Manager.
  2. Locate the parallel port settings.
  3. Double-click to open the properties tab.
  4. Select the Port Settings tab.
  5. Choose “Use any interrupt assigned to the port”
  6. Click Ok.

Step 4: Check for any malicious software or virus

It is recommended to run a virus scan to tackle this error code. After the scan is completed, remove the virus or malware.

Step 5: Verify whether Printer Spooler is running

  1. Press Windows + R. In the command box type services.msc and press Enter.
  2. Navigate to Printer Spooler and tap on it.
  3. Ensure the setting is automatic and running.
  4. If not, try to alter it.
  5. Select the Recovery Tab and edit the first failure to “Restart the services”.
  6. Choose Apply and check whether the error has been resolved.

Step 6: Re-install the printer drivers

If nothing else works, try reinstalling the printer drivers.

  1. Visit the Control Panel, find the system file, uninstall the drivers.
  2. Download the printer drivers and install them. Adhere to the instructions displayed on the screen.

The above-mentioned steps shall resolve the error code. However, if any issue persists it is advisable to dial our Brother printer customer service. Our team of experts work round the clock and are always ready to resolve all your printer related queries. 

Also Read: 

Latest Mobile Phones Under 17000 in India

How to Hide App In iPhone 13