Monday, November 23, 2020

8 Easy Solutions To How To Fix HP Printer Errors

 HP is one of the sought-after brands when we talk about printers. HP offers a wide range of printers suitable for all utility and affordability. At times, due to some glitch in software or hardware, the printer might incur some errors. Usually, the cause of an error code is perspicuously displayed on the monitor. However, if an error is ambiguous and you are in mayhem to resolve it, this article provides comprehensive HP printer troubleshooting retorts which are usually adopted to resolve various kinds of HP printer errors.

Step 1

Ensure that all connections to and from the printer are well fastened. If you are uncertain, simply switch off the printer and remove all the connections. Reconnect the cables and switch on the printer to check whether the HP printer error code is resolved.

Step 2

Confirm whether the cartridges are functioning properly. Check whether the ink level is adequate in the cartridges. If the level of ink is sufficient, just unmount the cartridges and position them in the correct position. If the ink is dwindling, replace the existing cartridges with new ones.

Step 3

Verify the HP printer software is working properly. If the device is unresponsive when given a command, uninstall the software and re-install it.

Step 4

Check if the firewall settings of the system are causing an issue. If so, open the firewall preferences and enlist the executable file of the printer software (*.exe) as an exception or simply disable the firewall settings for the time being.

Also Read: How to Fix HP Printer In Error State Windows 10?

Step 5

See that the print settings in the printer software are set properly. Confirm the printer margins are right,  and the paper size, paper type, and type of document to be printed are suitable for the printer.

Step 6

Align and clean the ink cartridges. Navigate to HP Solution Center or the HP printer software in your system to get hold of these maintenance properties.

Step 7

In the right bottom of the screen, double-click on the HP printer icon. Under “Status” look for any error messages. Right-click on the ongoing processes, and tap on Cancel.  

Step 8

Visit the HP website and try locating your printer and your error. Follow the steps mentioned to resolve those issues. You could also find the updated and required software there.

If the above-mentioned steps were inadequate to fix your issue, simply dial our HP printer support number. Our team comprises certified experts who work round the clock to provide the fastest resolutions to all your hp printer errors issues.

Sunday, November 15, 2020

Easy Guide to Fix HP Printer In Error State Windows 10?

 You were busy printing out the document required for your presentation tomorrow, and out of the blue the message “Printer is in error state”. Can be pretty vexatious, right? Fret not, the printer in an error state HP can be easily resolved by just executing a few methods. You can also mitigate this issue while chatting with HP Printer Technical Support. If you want to try your hands and resolve the issue by yourself, read on to know more.

What does the HP printer in an error state mean?

HP is a world-renowned brand, making some prolific printers that are in the market. Although HP printers are sturdy, they might encounter some issues. The HP Printer in an error state can spring up owing to myriad reasons like driver being corrupted, an issue with ink, printer being disconnected, the printer being jammed or the printer lead being open. When the HP Printer in an error state message sprouts, it hinders the print commands to reach the printer. The unfastened USB or some error in OS are the main propellants of the HP printer error state.

To fix HP Printer in Error State

Method 1: Uninstalling and reinstalling the drivers

Usually uninstalling and reinstalling the HP printer drivers can be efficacious in removing the HP printer in error state message. The steps for it are

  1. Open control panel.
  2. Select Devices and Printer.
  3. Right-click on the HP printer you are using> select Remove Device and confirm it.
  4. Restart the PC.
  5. After the system reboots, it would detect the printer and install it. If the printer is not detectable, remove the cable, and fasten it again.

Method 2: HP printer Troubleshooting

To evoke the HP printer Troubleshooting function, do as follows:

  • Verify the power supply to the printer is fastened properly.
  • Ensure the USB connection (for wired printers) and Wi-fi connection (for wireless printers) is adequate.
  • If the above criteria are met, download the HP printer troubleshooting program and install it.
  • Thereafter, if the issue persists, the probable reason is Driver. To tackle the issue related to a driver,
    • Click on start.
    • Select ‘, Device Manager’.
    • Expand the printer’s option and locate the printer in use.
    • Right-click on the located printer, and select ‘Update Drivers’.

Method 3: The printer is in Offline State

The HP printer error state might emerge due to the printer being in an offline state. To make the printer online,

  1. Select Start> Control Panel.
  2. Choose Devices and Printer
  3. Check whether the printer you are making use of us shows Ready. If so, it means the printer is online.
  4. If not, then right-click the printer you are using, and select ‘Use printer online’.

Method 5: Using Print Spooler

  • Press Windows + R.
  • Type services.msc and click enter.
  • Scroll down and choose the print spooler service by double-clicking on it.
  • Confirm whether the services are started and the default setting is Automatic.
  • If not, then make the setting to automatic, and start the service.
  • Click on Recovery Tab, modify the first failure option to “Restart the service”.
  • Choose the apply option.

The above-mentioned methods are some effortless procedures that can be utilized to resolve the HP printer in error state. Even after going through these steps, the printer is in error state HP persists, feel free to contact HP Printer Technical Support. I hope the article helped provide some fixes to the printer in error state hp.

Monday, October 5, 2020

What? Brother Printer All Lights Flashing? Solution Here

Brother Printer All Lights Flashing – This usually happens when your Brother printer interrupts your printing session. A continuous blink or flashing light is a signal that the printer is not working properly. When your printer encounters a red position, amber paper, drum light, all the lights flash together, the printer turns off and then turns on again without any reason. An error message appears on the display screen which says “LED lights flash together”. Also, you should not put printer safety at risk and follow these solution steps to solve your printer error. Help.



Effective solution to solve all the LED lights of brother together:

Brother Printer All Lights Flashing – At this point when each light is blazing simultaneously, turn off the printer power, hold for 5 seconds, and then turn on the printer control once again.

There are various ways to handle this error. But complexity can give you stress and anxiety. So it is better to stay on the blog to avoid unwanted troubles. Else Brother Printer troubleshooting Number is a better idea to deal with such situations.

  • Turn off your brother printer.
  • Press and hold the GO button for a few seconds. Also, turn on your printer.
  • Release the GO button until the toner light flashes.
  • Press the GO button once more until the paper light turns on.
  • Now release the button and check if the problem has occurred.
Also Read:: How to Bypass Hp printer Cartridge Error

Brother HL-5370DW – All the lights shine together

There is a brother HL-5370DW that all the lights went flashing. According to the place of repair of a printer I called, they said that it usually means either a power supply or a main board space is needed. Brother  says that its warranty has expired, however the serviceman gave me the impression that Brother had some issues with these issues and extended the warranty on some things.

Id just take it to a place of repair, but the nearest place I can find is more than an hour away. So I thought I could do a little research to see if I could do it myself – the ones that lead me to this place.

So it appears, I need to know how to test the power supply for the printer, to know what is bad or not, and if not, I think a main board for it Is the order of I hoped to find some more information online, but I guess I am not surprised that there is much to be found.

Any suggestions for finding information about the best way to proceed with the diagnosis, testing the power supply, or input?

Currently, when you power on the printer, the fans come on, the lights on the display light are normal, then they go out and then the status light turns green for a split second, and then they all start flashing.

Brother HL-21702130 – All four lights flashing

All four lights flashing on Brother HL-2130 mean severe printer flaws. You can find out what the real problem is by pressing the Go button on the printer.

  • Lights on the printer must be changed:
  • A bus error light means a main PCB failure.
  • Bus toner light means failure of the fuser unit.
  • Just drum light means laser unit failure.
  • Toner and error light mean main motor failure.
  • Toner and drum light mean high voltage failure.
  • Drum and error light means fan failure.
  • Toner, drum and error light mean zero cross failure. Unfortunately this means contacting brother for repairs.

Grab 24 * 7 Brother Printer Customer Support Number for immediate solution:

If the LED lights are flashing together, there is a problem, then call our Brother Printer Customer Service Number + 1-800-436-0509. Here we offer hands-on information to solve the problem. Apart from this, our support team will also guide you which solution will be better. Call now, take advantage of this opportunity and relieve you of stress.

Monday, September 28, 2020

9 Easy Steps How to Bypass Hp printer Cartridge Error

 A printer that does not recognize a new ink or toner cartridge is one of the most common problems owners experience when changing or replacing empty space, no matter what brand printer you have, and one that our customers often think about us Ask. This can mostly affect your printer when you replace a compatible, remunerated, generic or refilled ink cartridge and you can find a way to fix the issue. Read below why we explain why this happens and How to Bypass Hp Printer Cartridge Error.

How to Bypass Hp printer Cartridge Error


First, try our 9 tips to help solve this problem, then if you need further help then we have tips for specific brands at the bottom of this guide.

What is a compatible cartridge For Hp? 

A compatible cartridge is an ink cartridge that was not produced by the original manufacturer of your printer, but functions in exactly the same way as a branded product would.

Also Rad: 5 WAY TO FIX EPSON PRINTER COMMUNICATION ERROR

Why Hp Printer Cartridge error occurred?

There may be occasions when after installing a new ink or toner cartridge in your printer, you may see a message on your printer such as:

  • Your printer says that the printer is not toner compatible. ‘
  • Your printer says that no printer cartridge is not detected, or that your printer cannot detect ink.
  • The low or empty level of ink and toner that appears on your computer.
  • An HP printer with the Cart HP cartridge off ‘or Protection cartridge protection enabled.]
  • A message on your printer’s warning cartridge no cartridges installed ‘(or words to that effect).
  • Flashing warning lights on your printer.

Here are the most common reasons why your printer is not recognizing a cartridge:

Internal memory reset needed:

When you install a new cartridge and reset its internal memory, it should ensure that it is displaying full ink and toner levels, etc. However, sometimes the printer just does not do this correctly and believes that there is no old, or no cartridge. , Is currently inserted instead.

Protective strips not removed:

If you do not remove the protective covers or plastic strips that are attached to a new cartridge when you first take it out of its packaging, the printer will fail to register the new cartridge and will cause problems. Take the cartridge out of your printer and make sure that all the strips, tabs, or plastic covers are removed before re-installing the cartridge.

Also Read: Hp Printer Troubleshooting

Dirty / damaged contact chip data being read:

New ink or toner cartridges have multiple metal contacts that connect to the same metal contacts in the printer that allow them to communicate. Dirt or damage on the contacts inside the printer can prevent the contacts from connecting and prevent the printer from reading information on the chip.

HP cartridge protection is enabled:

Whenever you need to update the firmware, if you have an HP printer, an update can be installed ‘to enable cartridge protection’, then prevents these cartridges from working in another printer. Cartridge protection can also prevent compatibles from working in your machine. It can be closed. See how to fix HP cartridge on another printer.

Unlock Hp printer cartridge:

If your Hewlett-Packard printer does not have any Internet features, you can simply go to your printer settings, which can be located on your printer menu and you will see the option to enable HP cartridge protection. Just select the enable option and click Apply and save if necessary.

Incorrect consumable installed in a slot:

A rare occasion but it happens! Putting colored ink or toner cartridges in the wrong slot or buying the wrong cartridge model for your printer is a fairly easy mistake. Also, if a drum or fuser or other maintenance item was accidentally purchased instead of a toner cartridge and installed without a toner, the printer would not work and still needed a new cartridge.

Take all the cartridges out of the printer and check that they are in the correct color slot and that all necessary cartridges are present. If not, reinstall them and turn the printer off and switch back on to reset the system.

An Ink cartridge has not been inserted in its slot correctly:

There is also the possibility that an ink cartridge is not completely clicked on its designated slot and therefore the printer cannot detect the new ink cartridge and displays an error message. All you need to do is re-lift your cartridge cover and double-check each of the inserted cartridges to make sure they are clicked, then close the cover again and try once more.

In the case of toner, sometimes the toner may not sit correctly in the printer slot due to broken plastic parts. To fix this problem you will need to replace the toner.

Also Read:: Hp Printer Support phone number

A printer software update has rendered chip data useless or pasted it with an ’empty’ status

This is one of the main reasons for a compatible ink or toner not working in your printer. Modern printers are automatically connected to the Internet, but PC software or internal printer software (firmware) often needs to be updated at the request of the printer. These updates can often fix bugs but recently printer manufacturers have used the update to prevent compatible printers from working in your printer. Often, the cartridge is not compatible, or the recognized cartridge is not recognized, or like cartridges give a message like empty often.

The remanufactured ink chip can set an empty state for data which means you need to bypass the error. If you have a Hp printer.

Monday, September 21, 2020

5 WAY TO FIX EPSON PRINTER COMMUNICATION ERROR

 


DIY steps on how to fix communication error on Epson printer

Is your Epson printer not printing and scanning? Have you received the message 'Printer Paused'? Are you getting blurred and faint printouts during printing? All these problems occur when your printer is not able to communicate with the computer. The following are some reasons and steps to fix a Epson printer communication error :

  • Faulty power cable
  • Power socket faults
  • Loose cable connection
  • Wrong interface cable
  • Network problem while using wireless printer
  • Printer hardware problem
  • Outdated printer firmware
  • compatibility issues

Call the help desk support number (800) -436-0509

Before we proceed with Epson printer troubleshooting technical-to-do ', check the connection of all cables connecting the power outlet and printer to other devices:

Uninstall and Reinstall the Printer Drivers

Go to the Start menu and click on Control Panel. Go to Devices and Printers. Look for your Epson printer. Right click on it and choose Uninstall to remove old drivers from your computer. Now, open the Epson website, search for printer drivers under the download section and download the drivers on your desktop. Click on the driver downloadable file and install the drivers. Follow the instructions and once the installation process is complete, restart the system.

Also Read:: Great Ways To Fix Brother Printer Error 49 Code

Check Cable Connections

Turn off the printer and computer. Check if the cable of your multi-function apps printer is properly connected to the power slot and your PC. Turn on both devices.

Check Network Connections

If the printer is on the network, check the printer's TCP / IP address. Then, try printing the configuration page from the printer's control panel to check if it is displaying a duplicate IP message. If a duplicate IP message exists, update the IP address for the printer. Now, run a network diagnostics test to check the network settings for your printer and PC. On the printer's display, go to the control panel, select Troubleshooting. Go to Network Test and Network Diagnostics so that network test can be done successfully. The test results will be displayed on your printer's display. If it asks the network administrator to contact you, contact your Internet service provider.

Run Printer Trouble-shooter

Go to the Start menu and open the Control Panel. Search for a PC repair or trouble-shooter in the search box. Open trouble-shooter, go to hardware and sound, select your printer and troubleshoot it. If all is well, follow the next steps.

Reset the Printer

After performing the above steps, try resetting the printer using the set re-setter button. First, you need to download the button, and then extract the file to run the set again setter button to fix the communication error on your printer.

  If a Epson communication error still occurs on the Epson printer, it is time to get in touch with Epson technical support for additional assistance.

Monday, September 14, 2020

Great Ways To Fix Brother Printer Error 49 Code | Troubleshooting

 Being one of the best printers available in the market, it is not immune to common printing problems. You may face many problems with Brother Printer Error 49 is one of the printer errors that you may encounter with a printer. However, you can resolve Brother Printer Error 49 with simple and easy steps


How does a printer error "49" occur? How do you get rid of it?

One of the errors when printing a document is a "49.XXX" print error. This may be due to several reasons including lost data, invalid print orders, poor software, and loose cable connections. Due to the firmware being a form of error, it is difficult to pinpoint what is causing the error. The error can be quite worrisome, because if the printer error "49" occurs once,

Also Read:: Canon Printer Error 5100

unable to init 49 brother printer  can be resolved in the following ways:

  • By removing dual inline memory modules and augmented input / output cards
  • Resolving problems with printer drivers
  • Solving problems with formatter board

What is Printer error 49?

While printing, sometimes you may be unable to encounter this brother machine error 49. There can be several reasons behind this error. Such as invalid data, incorrect printing commands, loose cable connections and so on. This is a firmware error so it is difficult to identify the main reasons behind the error. Also, if it happens once, it is likely to happen multiple times.

Effective solution to solve Brother Printer Error 49:

If you have this DIMM and enhanced input-output cards in your printer, removing these will resolve Brother Printer Error 49 in most cases. Removed, restart your printer and see if the error occurs. If not, put the card back one by one, and replace the corrupt one or call the Brother Customer Care Service Number.

Remove Dual Inline Memory Modules And Augmented Input / Output Cards:

  • First, turn off the printer device.
  • And then, access it by rotating it to the right side of the printer.
  • Now, unplug all power cords and cable connections from the Brother printer device.
  • Grab the cover of the Brother Printer device and rotate it backwards until it stops.
  • And then, remove the cover by opening the screws.
  • Next, remove the dual inline memory modules placed within the antistatic package.
  • Place the DIMM against the back edge and check if all its slots are open. If not, change it.
  • After replacing the DIMM, follow the above steps in reverse order to re-install it.

Fix The Printer Driver Issues

The drivers are specifically designed to provide instructions to the printer for smooth functioning. If the driver is corrupted or replaced, many other problems may appear during use. Go to the control panel. Find the brother printer driver and check the status of the driver. You will find that the settings of the driver find the correct setting from the web and then make the necessary changes.

Fix Your Printer formatter Board

In the case of completing all the steps to solve the problem, you may have your printer formatter board malfunction. This is a large clip found inside the printer. The main objective of the board is to process the information and direct it to the appropriate component. If the experienced board is corrupted or broken, you may encounter this error.

Monday, September 7, 2020

Troubleshooting Tips To Fix Canon Printer Error 5100 (Easy Guide)

 Are you looking for a solution for your Canon printer error 5100? See this post to troubleshoot your Canon printer error

Canon is the most trusted brand for printers. Canon printers are purchased and used for home and office use by millions of people worldwide. Its printers are equipped with the best technologies. Printers built for office and home use are bundled with loads of features. Like any other printer or machine, sometimes you may have errors or problems with your Canon printer. The Canon Printer Error Code 5100 is one of those errors that is common and reported by many users worldwide.

Canon Printer Error 5100: Problem Overview

The Canon Support Code 5100 starts showing on the computer screen for various reasons. This can be easily solved by some troubleshooting steps. We will give you all possible reasons and solutions to fix this error very easy. You will be able to fix it yourself, just by reading and following the guide.

Which type of Canon printer has this problem?

Canon printer error code 5100 is the problem with most Canon printers. As we talk specifically about which type of printer is in Canon error code 5100, we can easily say according to our research that almost all types of printers have this problem but Canon All-in-One Inkjet Printer (Multifunction printers) have this problem mostly. There are other types of printers that run into this error such as the occasional Canon Professional Inkjet Printer, Canon Photo Inkjet Printer and Megatank Inkjet Printer.

Which Canon printer model has this problem?

As I have explained, most all-in-one printers (multifunction printers) have this error problem, but a specific model series mostly has this problem. It has been observed that PIXMA model series printers mostly encounter Canon printer error 5100. There are some printer models for which users often seek solutions to fix the Canon printer Error 5100. You will also be able to solve the problem for all these listed models and other models.

E410IP2770MP258MX410
E500IP2772MP280MX430
E510IP2870MP287MX432
E610IX6560MP450MX439
G2000JX210PMP470MX452
IP1300MG2570MP490MX472
IP1700MG4250MP600MX490
IP1800MP145MX310MX492
IP1880MP160MX340MX497
IP1900MP230MX360MX535
IP1980MP237MX377MX870
IP2700MP250MX397MX922

Solution: Canon Printer Error 5100

Let's hope to solve Canon printer error 5100. But before we start we need to understand what position you are stuck in such as if you have just bought a printer and you get this error 5100 when setting it up for the first time. This can only mean that you have left some protective material or tape inside the printer. This may be the most obvious reason for showing Canon printer error code 5100.

In this situation you just need to open the paper output cover and make sure that no protective material or tape is still attached to the ink cartridge holder. Now just close the printer paper output cover as it was before and this error has been fixed or not. If you are still receiving this error message, follow the step by step guide below to fix it. The Canon Error 5100 is basically just cartridge-related error.

Step-by-step guide to fix Canon printer error 5100

If your printer was running fine and you suddenly encountered this error, follow the troubleshooting steps below to fix the Canon printer error 5100

  • Check for paper jam inside the printer
  • Check printer cartridge fittings
  • Reset printer
  • Clean dust inside the printer
  • Clean the print bar / encoder
  • Look for obstruction or obstruction
  • Reset inkset

Check for paper jam inside the printer

If you were printing something and the Canon printer error 5100 showed up while printing, it is possible that the paper might get jammed. You need to clean the paper jam inside the printer.

  1. First, check the paper jam in the sheet feeder tray. If you see any paper, gently take out the paper with both hands, otherwise the paper may burst.
  2. Open printer output cover and make sure no piece of paper is inside.
  3. Open the printer back panel and check if the paper is trapped inside.
  4. Now load the paper again in the feeder tray
  5. Back on the power on and turn on the printer, if the paper jam is still inside then it will come out automatically.

Check Printer Cartridge Fitting –

The ink cartridge inside the printer can cause a Canon printer error 5100. Sometimes improperly set the printer to prevent the printer from working properly and this may trigger an error 5100. You need to properly rerun the printer cartridge to resolve this error. To resume the cartridge, place your printer on the steps below.

  1. Open the front panel, as you open the front panel cartridge will automatically move and close at the replacement position. Some Canon models are in the middle of the printer in the replacement position and in some, it is to the right of the printer. If in your printer, the replacement position is in the right side of the printer, then a separate cartridge cover will open. Now turn off the printer.
  2. Once the cartridge holder stops at the replacement position, press the cartridge down until it is clicked.
  3. Now you can remove the cartridge.
  4. Now re-set the cartridge in place again and make sure it is properly remodeled.
  5. Close the front cover and if it is checked.

Reset The Printer –

If you are getting an error message, then resetting the printer is one of the easiest steps to get rid of the error. Sometimes the printer needs to be reset after prolonged use. This may be needed after heavy work done by the printer. Any invalid buffer data is cleared when we reset the printer. It also resets sensors that may be stuck in special mode. Whenever you get stuck with some printer error you should try to reset the printer. To reset the printer, follow the steps below.

  1. Turn off the power of the printer with the power button. Some models are not available in the power button.
  2. Disconnect the power cord and data cable from the printer.
  3. Wait for 10 minutes and plug it back in.
  4. Now turn on the printer again.

Clean Dust Inside The Printer  –

If we do not keep our printer clean and away from dust, debris and ink, it can trigger a 5100 error. Cleaning your printer can fix the error. You should try to clean your printer periodically. To clean the printer, first turn it off.

Take a little dump cloth and clean the outside of the printer. Rub lint-free cloth and alcohol to clean the inner side, use with a gentle hand. Do not force any hardware. If you wish, you can use a vacuum cleaner or air can to clean by hand.

Clean The Printing Strip/Encoder  –

The printing strip is a transparent plastic material inside the printer that is just behind the drive belt and cartridge holder. It is transparent and plays an important role in printing. It communicates with the printer head. If it is dirty, it can also be a Canon printer error 5100.

Check whether this printing strip is clean or not. If it is a stain, clean it. To clean it you need a cotton swab and rubbing alcohol. Moisten a cotton swab with alcohol and gently wipe the encoder film. Do not touch it with your hand and change the swab repeatedly if it is dirty. Now if your encoder film is cleaned then close the output cover and turn on the printer. Check if the error has been resolved.

Look For Obstacle Or Obstruction –

Any obstruction that may prevent or prevent the movement of cartridges in its passage may result in a printer error 5100. Watch for any obstruction that may be en route to the cartridge. If you get any clear.

Reset Ink Absorber –

The ink absorber is for absorbing ink in the printer. Sometimes ink absorbers may cause printer error. Therefore, we only need to reset the ink absorber. To reset the ink absorber, you need to press and hold the power button, while reconnecting the power cord by pressing the power button. As soon as the printer is powered, then release the power button, pause for 5 seconds and press the power button again.

Tips to avoid Canon printer error 5100 and other issues

Your printer needs maintenance from time to time, as it needs another device to get out of it and it runs it error-free.

  • Keep your printer clean. Always check for dust, debris and ink stains if it is found to be clean at certain intervals.
  • Always use genuine ink cartridges.
  • Clean printer head occasionally to get the best quality print.
  • Always use paper of the right size and thickness.

Contact Canon Printer Support

The above steps should fix Canon Printer Error 5100. If your problem is not solved by following the above steps, you can take help of Canon printer support. Canon provides service for its products that are free for the first year after purchase. It also provides customer support to deal with technical issues such as Canon printer error.

Conclusion:

Hopefully, this post helps you troubleshoot Canon Printer Error 5100. We have explained all the solutions in detail so that you can fix the problem. Let's know, how useful was this post to solve your problem?

Monday, August 31, 2020

These Amazing Method to Fix HP Printer Error 0x6100004a?

 Some users are seeing the HP Printer Error 0x6100004a on the screen of their HP printer whenever they try to use it. This problem is not limited to any particular model and is confirmed to affect models 6962 6968, 6830 and 6810 (there may be other models that behave in a similar way).



What is the reason for hp printer error 0x6100004a

Firmware glitch –After a prolonged use period or an unexpected machine interruption, you may experience a machine-wide printing freeze that will trigger this particular error code. To fix this, you will need t

Filled ink cartridge vents and contacts –You can also see this printer error due to blockage in cartridge contacts or vents. If this scenario is applicable, you should be able to fix the problem by cleaning all the ink cartridge contacts and vents and then reinstalling them one by one to determine what causes a specific problem.

Carriage ban due to stuck paper - Paper jamming may also be responsible for the 0x6100004a error. In some circumstances, the remaining paper may restrict the cart from moving freely across the width of the printer. In this case, you should open and check the ink cartridge entrance and remove any foreign objects that may cause obstruction.

Method 1: Reset Entire Printing System

The hp printer troubleshooting step commonly recommended by HP technicians in the event that the printing machine no longer refuses to work is to reset the entire printing system. You will not need to be tech-savvy to perform this operation and will not expose your machine to any risk of damage to it.

On the printer, resetting the printing mechanism is equivalent to performing a power cycling process on a computer and gaming console. Many affected users have confirmed that the operation was resolved after completing the steps below.

A quick step by step guide on resetting the printing mechanism is:

  • Turn on the printer (if it is not already) and wait until the startup sequence is complete.
  • Note: If you hear any noise, wait until the printer enters Idol mode and goes silent before continuing the next step.
  • Disconnect the power cord from the back of your printer (while your printer is on, but in idle mode). Once the power is cut, remove the power cord from the wall outlet.
  • Wait 60 seconds or more before returning the power cord to the wall outlet. Next, reconnect the power cord on the back of your printer.
  • Turn on your printer and wait until its initial warm-up period ends.
  • Once your printer is silent and enters idle mode, try printing something and see if the issue is now resolved.

It still ends up showing the same 0x6100004a error when you try to print something, then move on to the next possible fix below.

Also Read:: Download And Install Brother iPrint and Scan|Windows, IOS, Android

Method 2: Cleaning the ink cartridge vents and contacts

As it turns out, you can see the 0x610004a error code on your printer due to a cartridge contact or vent interruption. If this scenario applies, you should be able to solve the problem by cleaning the ink cartridge contacts and vents and then reinstalling them at that time to determine if a specific cartridge is causing the error message. needed.

Important: This method is a bit more advance and may damage some additional printer components if not performed properly. If your printer is under warranty, take it to a specialized technician as the steps below may terminate your warranty.

If you're ready to go through this potential improvement, here's what you need:

Prerequisites

  • A pin (used to clean any closed vents)
  • A lint-free cloth (used for general cleaning)
  • A dry cotton swab (used for general cleaning)
  • Distilled or bottled water - Do not use tap water as it may contain contaminants that may damage the printhead.

Here's what you need to do to clean the ink cartridge vents and contacts:

  • Turn off your printer completely and wait 60 seconds or more before starting the process.
  • Look at the vent area of each cartridge (on top of the component) and see if you notice any clogged vents.
  • If any of your cartridges have vents, use a pin to clean them.
  • Next, use a lint-free cloth to wipe any accumulated ink and debris on the copper contact to the ink cartridge.
  • Repeat the steps above to clean each of the ink cartridge contacts.
  • Use a lint-free swab to wipe any accumulated ink or debris on the copper-colored contact on the print head.
  • Re-enter each cartridge that you just carefully cleaned in their slot, then push the ink cartridge down until it is in place.
  • Note: It is super important that you ensure each colored slot on the ink cartridge matches the colored dot on the cart.
  • Close the ink cartridge access door and re-power your printer.
  • Repeat the action that was previously causing the 0x6100004a error and see if the problem is now resolved.

Method 3: Ensuring that the carriage is not restricted

As it explains an additional scenario that could trigger the 0x6100004a error is a problem facilitated by paper jamming. In this case, you should proceed by making sure that the cart runs independently across the width of the printer.

Keep in mind that this can only be checked by opening the ink cartridge entrance and doing some manual checking (requiring a flashlight or other illuminating device).

Several users who have found themselves in a similar situation have confirmed that the steps below ultimately allowed them to resolve the error message and print normally.

Here's what you have to do:

  • Turn on your printer and wait for it to enter idle mode (when it goes silent).
  • Open the cartridge access door (while the printer is on) and disconnect the power cord from the back of the printer. Next, unplug the power cord from the power cord (most likely the wall outlet).

Note: It is very important that you unplug the power cord as you will proceed by touching the paper feed mechanism. Doing so will eliminate the risk of electric shock.

  • Use your flashlight to check for any paper residues or items that may prevent vehicle movement. If you find something that is causing problems, remove them

Note: Be careful when you remove any stuck paper. Make sure you also check the rollers and wells for torn pieces that still remain inside the printer. If you omit any remaining objects, further jamming may occur.

  • After successfully removing any loose paper and obstructions you have found, close the ink cartridge access door and reconnect the power cord to the printer's reality and then plug the power cord back into your power outlet.
  • See if this process has allowed you to fix the problem by trying to start the printing process and to see if the 0x6100004a error is still occurring.

If the same problem persists, proceed to the next possible determination below.

Method 4: Contact HP Support

If none of the methods above have allowed you to fix the problem, then it is very likely that you will not be able to fix the problem yourself. In this case, the best course of action is to liaise with an HP technician (via hp phone support) and allow him to troubleshoot with you.

Monday, August 24, 2020

Download And Install Brother iPrint and Scan|Windows, IOS, Android

 Brother iPrint and Scan is a free application that enables you to print and / or scan from your Android and iOS supported devices, including the iPhone, iPad, and iPod touch on your wireless network without using a computer.

brother iprint and scan


Printing or scanning is not available on all Brother machines.

Brother iPrint and Scan is one of the free applications that lets you print and scan your mobile device. Use your local wireless network to attach all-in-one or your mobile devices to your Brother printer. For a list of maintained models, visit your local brother website. The software provides scanning and printing services for Brother printers. With this app, individuals can easily print photos and documents.

Key Features of Brother iPrint & Scan

  • Easy to use the menu
  • Save scanned images to your One Drive account or mobile device.
  • Mechanically, search for supported devices on a local wireless network.
  • No driver and no PC required.
  • Print photos directly from your mobile camera.
  • Print Microsoft Office documents or PDF files from your One Drive account.
  • Simple ways to print your favourite documents and photos (Word, PDF, Excel, PowerPoint)
  • Scan directly on your mobile device.

For Brother Printer troubleshooting, confirm the following:

STEP 1: Network Settings

Your mobile device must be connected to the same network that is currently connected to your brother machine.

  • To configure your Brother printer device for a network, see the latest QuickSetup Guide, a network user guide or online user guide available in the manual section of this website.
  • Configure your mobile device for a Wi-Fi connection, discuss your mobile device's user's guide.

Step 2: Setting up Brother iPrint and Scan

To print or scan with your Brother device, you will have to install Brother's iPrint and Scan application on your mobile device

Also Read:: Brother Control Center 4

For iOS devices:

The latest Brother iPrint and Scan version is always available for free on the Apple App Store.

Brother iPrint and Scan enables you to:

  • Print documents, photos, and web pages directly from your mobile device to iCloud Services.
  • Scan images and documents and then save them directly to your mobile device's photo album or iCloud, send them in an e-mail, or open them with other applications in your mobile device.
Also Read::Brother printer Driver

For Android Devices:

The latest Brother iPrint and Scan version is always available for free on the Google Play ™ store.

Brother iPrint and Scan allows you to:

  • Print documents, photos, Gmail and web pages directly from cloud services to your mobile device.
  • Scan images and documents and then save them directly to your mobile device's memory card or open them with other applications in your mobile device.

Simple and Accessible

Brother iPrint and Scan Lite is software required for owners of Brother machines. Individuals may have their photos and documents prepared in a device. They also have the option of printing from a mobile device or PC.

Monday, August 17, 2020

How to download and install Brother Control Center 4 update

 Note: If you do not already have the Brother Control Center 4 program installed, please download and install the complete driver and software package on your computer: Click to download the instructions



1. Download the Connector 4 update tool

  • Download Control Center4 update tool from the brother download website
  • Type your model number in the field: Search by model name, and press Search.
  • On the Select Your Operating System page, just click: Search.
  • Click the ControlCenter 4 update tool under the Utilities section.
  • Click: EULA and agree to download.
Also Read:: Brother Printer Troubleshooting

2. APPLY CONTROL CENTER 4 UPDATE

Once the file is downloaded, you must complete the following steps to install it.

  • Close the Brother Control Center4 program if it is running.
  • Locate the file you downloaded CC4Updater … and double-click on it.
  • -Most browsers will download the file to your default “download” folder.
  • If prompted with a security warning, click Yes or Run.
  • Once the decomposition is complete, click OK.
  • Control and double-click the decomposed file labeled ControlCenter4 Updater.exe.
  •  If prompted with a security warning, click Yes or Run.
  • Click Next.
  • Once the installation is complete, click on Final. Control Center4 has been updated.
  • Restart your computer.
Also Read:: Brother Printer support Number

What To Do If Brother Printer Not Detected in Brother Control Center

Although, Brother Printers are quite admirable and beautiful, they are not without fault, which is why the users of Brother Printers have been suffering from various problems over time. One of the most common and most serious problems that sibling printer users have encountered and continues to be affected by is their wireless printers not being detected and detected by their computers and ControlCenter4 (the resident suite for Brother printers) Both computers and printers are connected wirelessly to each other. Since the printer is not detected by the computer, the user fails to communicate with their printer, doing nothing to print, scan, or photocopy their printer, making their printer very unusable goes.

In such cases, users receive an error (model number of LAN) LAN cannot be found. This problem can be caused by anything from security issues to corrupt registry keys or entries that have been created since Windows Update. This issue is commonly known to affect users of the Brother MFC-7860DW wireless printer, but may affect any and all printers originally manufactured by Brother. Fortunately, however, it is very simple and easy to fix this problem and get your computer to successfully detect, display, and communicate with your Brother printer. The following are two of the most effective measures you can use to fix any problems that your brother printer may have with displaying and not working in Controller 4.

Method 1: Clean all Twain, Twunk and .mtx files in the Temp folder

Hold down the Windows key and press Run Dial. Type% temp% and click OK.

Locate and delete any and all files in the Temp folder that have twins or twinks in their names or .mtx as their file extension. Examples of such files include Log, TwentiRMTX, TwinkTeen.mtx, and Twunk002TTX.

Once you delete all such files, restart your computer and your Brother printer should not only be detected, but also start working above the powers of your computer.

Method 2: Clean your computer’s registry using CCleaner

If Method 1 does not work for you and does not successfully detect your Brother printer, a scenario that is quite unlikely, another solution that proved to work for countless Windows users affected by the issue Is, using CCleaner to clean up the registry of the affected computer.

  • Go here and download CCleaner and click on Free Download
  • Install CCleaner.
  • Open CCleaner.
  • Navigate to the registry
  • Click the checkbox and place a checkmark with all the items in the list in the right-hand pane.
  • Click on scan for issues and wait for the scan to complete.
  • Once the scan is complete, make sure all known problems have a checkmark beside them and click Fix Selected Issues
  • When asked whether you want to make a backup of your registry in its current state, click Yes and save the backup of your current registry if CCleaner messes up and removes registry entries or keys Returns that are important to your system.
  • When a dialog opens, click Fix all selected issues. Once all the selected issues are fixed, close the dialog by clicking Close.
Monday, August 10, 2020

HOW TO FIX BROTHER PRINTER ERROR 50 | 18004360509

 Brother printers are technically designed to provide complete printing solutions. They are of good quality and are the best in printing solutions. Since these are technical devices, one cannot expect them to be error free. One of the commonly occurring brother printer error 50.


Troubleshooting Tips To Fix Brother Printer Error 50

Brother printer error 50 is an internal issue that occurs when users try to unplug their printer device and plug it in again. The message “Unable to print 50” will appear on the display if a foreign object that may contain a paper clip or a broken piece of paper is stuck in the machine. This message pops up mainly due to an issue with the print head. Your print head includes cartridges that sit inside the printer.

Also Read:: Brother Printer Problems

Now how to fix Brother Printer Error Code 50, follow the steps given below –

  • Transfer all faxes to another fax machine so that no important messages are lost. All fax messages will go directly to the machine’s memory because it cannot print at the moment. Thus, if extremely important, faxes can be transferred to another machine, to avoid losing them. This helps save time and important faxes can be easily recovered.
  • Open the scanner in an upward direction. Then carefully examine the left and right sides and even the center to remove any paper scraps that may have jammed under the print head.
  • Keep the scanner cover left open. Try turning the machine around that you are looking at the back of the machine.
  • Open the clear jam cover on the back of the machine.
  • Watch for traces of foreign objects or jammed paper. Get rid of them and close the jam cover and scanner cover.
  • If “50 unable to print” is displayed again, unplug the machine from the power outlet for 1 minute, then plug it in again. Remove all ink cartridges, turn off the printer, turn it upside down and shake it for a few seconds.
  • If “50 unable to print” is approved, do a print quality check sheet (PQCS). If it is working and prints successfully, then the problem is resolved. If not, repeat from step 1 again.
Also Read:: Epson Printer Error 0Xf3

There are many online support facilities to repair printers covering all types of error codes. This actually eases the workflow as the device is taken care of and recovers as quickly as possible. Also, there are guidelines on how to fix Brother Printer Error Code 50 for Swift Recovery.