Easy Guide for Setup Canon MG3620 | 817 442 6637

 Canon Pixma MG3620 Unboxing Setup

These are the guidelines for Setup Canon MG3620 printer.

• ·         Canon Pixma MG3620 Open the carton and take out the small cardboard box.
• ·         Inside the carton are the Canon Pixma Power Cable, PG240 Black and CLI 241 Tricolor ink cartridges in a cardboard box. Keep these components separate.
• ·         Canon Pixma Device is packaged inside a plastic bag which is placed inside a carton. With the Pixma printer remove the plastic bag and set the block of Styrofoam aside for recycling.
• ·         Gently remove the Canon Pixma MG3620 device from the plastic bag and place it on a stable platform.
• ·         You will find a lot of tape sticking to the surface of the Canon Pixma device. When these tapes are peeled off they leave no residue. So, peel them one after the other and make sure you remove them all.
• ·         Take the Canon Pixma power cable out of the small cardboard box and uncoil it. Plug it into the Canon Pixma device's rear power port and power outlet.
• ·         Be sure to connect the Pixma power cable directly to the printer. If the Canon Pixma device is connected to a power source via a power strip, remove it from there and establish a direct power connection.
• ·         Lower the front cover of the Canon Pixma MG3620 printer and remove the tape sticking to the inside surfaces. The Canon Pixma Print cartridge slot is located on the right. Lower the print cartridge access door.
• ·         Unboxing Canon Pixma MG3620 Setup

·         Take Canon Pixma print cartridges out of their packaging. Peel off the tapes covering their electrical contacts. Push the print cartridge latch down, install the Canon print cartridge, and push the ink cartridge latch up again. Now, take off the front cover and ink cartridge access door.

·         This completes the unboxing and setup of the Canon Pixma MG3620.

Canon Pixma MG3620 Driver Download

Canon Pixma MG3620 drivers can be downloaded from this site to connect your Windows and Mac computers with Canon Pixma devices. The Canon Pixma MG3620 printer also supports mobile printing and AirPrint. To download Canon Pixma MG3620 Setup driver to your computer, navigate to the driver download button on this site and click on it. Make sure you click the Download button at the bottom of your computer's operating system, Windows or Mac.

 Canon Pixma MG3620 Manual Download

Canon Pixma MG3620 drivers can be downloaded from this site to connect your Windows and Mac computers with Canon Pixma devices. The Canon Pixma MG3620 printer also supports mobile printing and AirPrint. To download Canon Pixma MG3620 Printer to your computer, navigate to the Driver Download button on this site and click on it. Make sure you click the Download button at the bottom of your computer's operating system, Windows or Mac.

If you need instant Help dial canon printer phone number 817 442 6637.

Other Articles::

Know How To Upgrade Windows 10 To Window 11

Get An Easy Help To Fix Lexmark Printer Error 1203

 There is an important presentation to be made and you will need to provide printed versions of the presentation. But your Lexmark printer decided to take a break that day? Well, these types of problems happen but you don't have to lose your temper over it because here is a solution to fix Lexmark printer error 1203.

Error Code 1203 on Lexmark Printer  :

Error 1203 is a sign of the fact that there is something seriously wrong with the print cartridge and this is where you need to start. The first step should be to reinstall the print cartridge and to do so follow the facts below.

 

• ·         While the printer is on, remove the cartridge. You need to be careful while doing this. Pull up the control panel and then very carefully, open the access door to the cartridge. The cartridge carrier will automatically accelerate and stop at its loading position. Now you can pick up the cartridge.
• ·         Please turn off the printer.
• ·         turn it on
• ·         How to do the correct re-installation of the cartridge?
• ·         Insert the colored cartridge on the left and the black cartridge on the right.
• ·         Push it back slowly until it is securely in the correct position. Make sure it is secure.
• ·         Check operator panel if it is still displaying error 1203. If so, you will need to clean the cartridge. Instead, if the message says cartridges are missing, replace them.

·         Check the operator panel again. If the error reappears then repeat all steps up to 5 and then insert one cartridge at a time. How to do it carefully? After inserting one at a time, be careful to lock the entrance and door to the control room. Sometimes, because the doors do not close well, it may show an error. This will help you diagnose the problematic one and you can change it once you know which one is causing the headache.

·         If this method also fails, you will have to post in a discussion group online and get a solution from them.

If it fails then you will have to resort to last but certainly not the least and that is to contact Lexmark Printer Technical Support  and seek their help in resolving the problem. IT will be available 24 X 7 and you can contact them through mail or call or live chat where you can attach pictures or videos of your problem. Usually, they will provide you with the details of the nearest Lexmark printer troubleshooting service center where their team of qualified technicians will assist you in solving the problem.

 

Printers are man-made items and like any other machine it requires constant care and sometimes, even after using it with the last care, it can give problems. So always look for a solution to its problem.

Download Brother Solutions center | Windows , Mac

 Encountering problems with your Brother printer? Well, all you need is determination. To get more help call or walk to your nearest brother solution center. Our Brother Solutions center is meanwhile trustworthy and profitable. We empower you to get the main support you need for printer-related issues and more. This service is provided to you by our expert who gives you an opportunity to get your queries answered through call.

All the problems you experience while using your Brother printer will be solved. All you have to do is visit us at the Brother Solutions center or dial our toll-free number. In addition, our Brother Solution Centers are committed to providing services to expert clients. Our experts are very qualified and are especially careful with the current issues which are the most basic nowadays. The experts at Brother Printer Service Center know the most profitable steps towards protecting such issues.

The reasons why the Brother printer is offline can be endless. Some of the many reasons may include incorrect USB connection, device malfunction, or outdated drivers. This way, the reason for the failure of your Brother printer driver can be any. You have a separate answer for each issue and the same will be provided by our Brother Printer Service Center. Our services are available 24/7 throughout the year, via call, online or even offline. Our customers could have resolved the issues by their end earlier. And if it is not working properly then they are welcome to call our experts at Brother Printer Service Center.

Brother Solutions center  promises cost-effective and long-lasting services

The Brother Solutions center 's presence has been efficient over the years and more spectacular to look at. Printers by Brother are so severely lined up that they don't support paper sticking. Gadget was damaged or was not connected correctly by any drawing out of spec. Truth be told, these specialized competencies are the most unique issues customers turn to. If at all possible the Brother printer offline problem is more of a problem than these very urgent issues, that too on a general principle.

Calling and connecting to the Brother Solutions center  is easy. The experts here believe in giving the best solutions. The services provided at our Brother Printer Service Center are most informative. They will not leave you unattended and upset at any cost. The officials of Brother Solution Center are well trained and well behaved. They will provide the best advice and solution related to your Brother printer. Our services have not left any customer unsatisfied so far; We assure the best for our customers. Don't hesitate before reaching out to our Brother Printer Service Center for our assistance.

Also read:

best smart tv under 30000

Latest Mobile Phones Under 17000 in India

How to check Jio balance

How to Set Caller Tune In Airtel

Resolve Printer In Error State |Hp, Epson , Brother, Canon

 

·       The printing process has been blocked by the system problem, the printer is indicated in the error message.

·         To take your printer out of error status, the first solution is to change the port settings.

·         Do you have any other problems with your printer? Fix it like an engineer in our full way.

·         If any other peripheral, not only need to fix your printer, then do not sweat it because we have a full fix peripheral center for you.

To fix various PC problems, we recommend Restore PC Repair Tool:

This software will repair normal computer errors, will keep you safe with file loss, malware, hardware failure, and will customize your PC for maximum performance. Fix PC issues and delete viruses in 3 easy steps:

·         Patent Technologies (Patent Available Here) Download Restauro PC Repair Tools.

·         Click Start Scan to find Windows Problems that can cause PC problems.

·         Click on repair all to fix issues affecting your computer's security and performance

·         Restauro has been downloaded by 833,511 readers this month.

·         Some Windows 10 users have a problem while trying to use their printers.

 

.

The printing process has been blocked by the system problem, the printer in error state message.

What does it mean when the printer is in error state? Typically, this problem is due to system permission settings, contaminated drivers, or system conflict.

 

To help you fix this problem, we have compiled this troubleshooting guide.

 

How do I get my printer from an error status?

1. Change port settings

·         Press Windows Logo Key + R on your Keyboard> Type devmgmt.msc and press Enter to open Device Manager

·         NVDISPLAY container exe causes high CPU usage

·         Click on the top menu> Select Show Hidden Device

·         Right-click Port (Com and LPT)> Select Owners

·         Open Port Settings tab in the Property Window

·         Select any interrupt assigned to the port

·         Check the next box to enable heritage plug and click on Plain Displays> OK

·         Reboot your computer and see if this problem is fixed

2. Make sure your printer is online

·         Open Control Panel> Select Device and Printer

·         Default printer keeps returning back

·         Select printer

·         If you see that your printer is offline position, right-click it, and select Printer Online Use

·         If it was able to go online, you will see the prepared message instead of offline.

You may also be interested in search of 6 best printer management software to customize the performance

 

3. Restore the printer driver

·         Open Control Panel> See by Large Icon

·         Click on devices and printers

·         Right-click on your printer> Select Remove Device

·         Confirm the removal of the device and restart your computer

After the PC reboot, it should automatically detect and install your printer, if not, unplug it and plug it again.

4. Set automatically print spooler service

·         Type the Windows Logo Key + R on your keyboard> Type services.msc in the run box and press Enter.

·         Show Network Taskbar in Windows 7 and Windows 10

·         Discover the print spooler service in the right pane and first make sure it is set to start

·         Right-click on Print Spools> Select Owners

 

In the General tab, set the Startup Type Automatically from the drop-down menu> Click Apply> OK

Close the service window and restart your computer to see if this problem is fixed or not.

5. Update Windows

·         Start Button> Press Open Settings

·         Click Update and Security

·         Select Windows Update

·         Click on check for updates

 

If it gets an update, then complete the process and restart your computer

After rebooting your PC, why check the issue on updating windows.

Also Read:: Printer Support Number

HOW TO FIX HP PRINTER ERROR CODE 0XC19A0013

 This is one of the most commonly asked questions on search engines. Code 0xc19a0013 is an error related to ink system failure. According to HP printer technicians, the error disrupts the printer's control system. Mostly, it hinders the functions of the cartridge. Sometimes, the error doesn't even allow the cartridge to move in the correct direction, stopping printing midway.

Error code 0xc19a0013 is a common FAQ for many users

Are you looking for some viable answers to "HP printer error code 0xC19A0013"? Here, we will share some helpful steps following which you can easily resolve the issue. Calling an HP Technician Before, you can try these steps.

Step 1: Unplug USB cord & remove cartridges

·         Turn on the printer power.

·         Unplug the USB cord from the back.

·         Now, open the lid and remove the cartridge carefully.

·         Close the lid and wait for the pop-up message from the control panel to insert the cartridge.

·         Now, run the printer to check whether it is printing or not. If the code 0xC19A0013 error persists, try the next step.

Step 2:  Test with power-cycle method

·         Disconnect the power cord and also unplug it from the wall outlet.

·         Wait for some time.

·         Go ahead and reconnect the power cord and turn the printer ON.

·         Run a test print.

 Step 3:  Reset the printer

Reset the printer by following the user manual and following the directions.

·         turn on the printer

·         wait till it's silent

·         Remove the power cord from the back end of the device

·         Remove power cord from wall outlet

·         wait at least 60 seconds

·         HP wants power cord connecting printer directly to wall outlet

·         plug in rear power cord

·         Turn on the printer if it fails to turn on automatically

·         Wait until the printer is silent

·         Run a test print to check if hp error code 0xC19A0013 persists

Step 4: Uninstall and reinstall the drive

You can also find many useful online videos on resetting said model's printer as well as uninstalling and reinstalling the drive.

Some recommendations from HP

HP recommends some helpful tips for users to follow in order to avoid code 0xC19A0013 errors.

Use genuine HP The company does not guarantee the quality of non-HP cartridges or refill cartridges.

It is important to keep the printer clean. Users should open the lid or if they can disassemble the printer, disassemble the printer and use a fresh piece of cloth to clean off print dirt and traces of foreign bodies such as tape, papers, etc. which are mainly responsible for interrupting the printing process.

Use a good quality antivirus to protect drivers and printers from malware, firmware or any other virus attack.

 For Instant solution dial hp customer service number 817 442 6637

Also Read:

• HP 49.4 C02 Service Error
• Canon Mg2522 Troubleshooting
• free video editing Software for pc
• How to Record WhatsApp Call

Canon printer Error U052 | Fix It Here 817 442 6637

There are two different situations associated with U052 kind of error message.One is the point where the print head isn't installed at all and it is giving the'U052 This kind of print head is incorrect' error message.

And, the second situation is where the print head is installed nut it isn't functioning properly or likely not working at all.  The below section will reveal step by step troubleshooting of the situations.

 

Getting Error U052 with Print head installed

1.  Open the top lid of the printer in order to get into the printer's cartridges and the print head.  When you open the top lid, the cartridges slot will automatically lift up to the middle front of the printer.

2.   If there aren't any cartridges or print head in the printer, then the positioning of the cartridge slots will obviously be in the center front of the printer with the lever lifted up.

3.  Install the print head in to the sliding rail just beside the capsules slot.

4.   Close to the lever and make sure there is no open doorway and the cartridges and the print heads are correctly installed.

5.  Close the top lid of the printer.

6.  Reinsert the print head and the ink cartridges into the printer and make certain there aren't any open doorways and the lever is back in position.

7.  Take out a test print in order to check if the canon Error U052 is solved.

8.  Switch On Printer

9.  Take out a test print in order to check if the Error U052 is resolved.

Getting U052 Without Any Printhead Installed

1.  Switch off the printer.

2.  Unplug the printer from the switch board.  Ensure that the cartridge lever located on the face of the cartridge is lifted up.  In this place of the lever, the cartridge slot will not auto move.

3.  Remove all of the ink cartridges from the cartridges slot.

4.  Removal of cartridges will expose the black print head.  Now just gently remove the print head from the printer.  The technique to take out the print head would be to grab it just in which the cartridges must be inserted, pull it lightly and the print head will emerge.

5.  Then carry out the basic cleaning cycle around the print head.

6.  Reinsert the print head and the ink cartridges into the printer and make sure that there are no open doors and the lever is back in place.

7.  Close the top lid of the printer.

8.  In order to resolve the Canon Printer error U052 this kind of print head is incorrect', the troubleshooting approach given above will work in case of either of the scenarios. 

A whole lot of Canon printer's users come across with the error message,"U052 This kind of print head is incorrect."  It is a very common error on Canon printers and can be fairly easy to Canon printer troubleshooting.

 

 

 

 

 

How to Reset Brother HL-2270dw and HL-2240d printers Toner

 If you own either Brother HL-2270DW or HL-2240D printers then you may run into a problem with the toner light not allowing you to print. If this problem persists even after replacing the toner, then your printer may require a simple reset. To fix the problem and reset the toner sensor, just follow these simple steps to toner reset brother hl 2270dw printer

1. Open the front cover and open it while performing the following steps

2. Turn off the printer

3. While holding the printer on, hold down the Go button. All lights should now be on.

4. Release the Go button or Start button

5. Press the Go button or press the Start button twice

6. Stop and wait. All lights must be on.

7. Press the Go button or press the Start button 5 times

8. The toner light should be off now

9. The paper light must be on or flashing

10. Close the front cover

11. ready light should be the only light

12. You may need to reboot your computer to resume normal printing

If you continue to experience printer problems ever after resetting your toner, contact us at 817 442 6637. We provide printer service and repair near San Marcos, Escondido, Vista, Carlsbad, Encinitas and La Costa.

How to download the HP Printer Assistant?

In this section, you will find relevant details for the process of HP Printer Assistant download which can be easily done by visiting HP’s official website. You may also use HP Support Assistant which has similar features as HP Printer Assistant.

1. First of all, turn on your HP Printer and disconnect all the cables that are connecting your printer and the computer (if there is any).
2. Now go to the official page of HP or HP Customer service.
3. After this, go to Software and Driver Downloads.
4. When you see “Let's identify your product to get started” page on your screen, tap on the “Printers” icon/option.
5. Here, you have to type the model number of your printer and hit the “Submit” button.
6. The resulting page will display the default operating system which can be changed manually.
7. To change the OS, tap on “Change” and select your version followed by tapping on “Change” again.
8. In the end, tap on the “Download” option which is present under “Driver”.

How to install HP PrinterAssistant software?

Upon completing the download process, you have to go for the HP Printer software installation. For this,

1. From the “Software and Downloads” page look for the downloaded software.
2. When you locate “HP Printer Assistant” simply tap on it.
3. The installation process will begin on its own.
4. The installer will prompt you to make a choice between the “Typical” or “Recommended” type of installation.
5. Here, you have to choose the desired option.

Download HP Printer Assistant Windows 10

SinceHP Printer Assistant is a Windows-based program, you can easily have it on your Windows 10 device as well. The software comes pre-installed on your Windows device whenever you install the HP driver on it. Many HP Printer models such as HP Officejet8610, 8620, 8625, 8600, 6988, 8615, HPOfficejet 4620, HP Deskjet 5550, HPOfficejet 6700, HPPhotosmart 5520, HPPhotosmart 7520, HP Deskjet 5150 come with HP Printer Assistant.

To download HP Printer Assistant on Windows 10, the process is similar as already mentioned in the previous sections. When you download the software from the official website, change the default operating systems settings and select “Windows 10”.

HP Printer Assistant Mac

HP support Assistant is not available for macOS or OS X. Mac users can install a full feature driver which is known as “HP Utility” because it has similar tools and features as HP Assistant.

HP utility mac download

1. After disconnecting the cables that connects your printer and the computer you have to go to the HP printer Support page followed by “Software and Driver Downloads”.
2. When your screen displays“Let's identify your product to get started”, click Printer and type your printer model number.
3. Change the default operating system by following the prompts.
4. Now, tap on the “Download” button which is available next to “HP Easy Start”.

This is how you can download HP utility on mac.

How to connect the HP Printer Assistant to a new printer?

When you upgrade your Windows, the printer information in HP Assistant and Windows is lost. In this situation, the HP Printer Assistant prompts to connect a new printer, you can perform the following process of HP Printer connect:

Connect the printer again to regain access to the HP Printer Assistant tools.

1. First of all, open your Windows and click on the “Devices and Printers” tab.
2. Now, click“Connect a new printer”.
3. After this, select the connection type when asked.
4. Follow the on-screen prompts that will help to set up the printer.
5. Now, you have to turn off the printer followed by restarting your computer.
6. In this step, you have to turn on the printer followed by opening HP Printer Assistant.

How do I setup the HP Printer?

For HPPrinter setup review the steps given below:

1. First of all, you have to take out the printer from the box.
2. After this, connect the power cable.
3. Now, set the control panel preferences.
4. In this step, install the ink cartridges, and then load paper into the tray.
5. Download and install HP Printer drivers and you are done.

Fix “HP Printer Assistant scannot working”

Follow the steps below to resolve scanning problems with your HP Assistant Printer.

1. To resolve the issue, first, you have to download the HP Print and Scan Doctor.
2. Now, run the HPPSdr.exe which is present in the “downloads” folder of your computer.
3. Once it is open, tap on“Start”, and choose your printer.
4. In the end, tap on the option that reads as “Fix Scanning”.

Also Read:

• Best smartwatches under 5000
• How To Check Saved WiFi Password In Windows 10

Fix Your Epson Communication Error with Easy Method

 Epson Communication Error is a common problem that users often face while working on their Epson printer. It signifies an error that makes difficulties when your Epson printer tries to communicate with your computer or other devices. However, Epson is a reliable popular name when it comes to manufacturing high-performing printers and scanners. These machines come up with a nominal price and help personally and professionally both. So, through this blog, you will get to know about some effective solutions to fix Epson Communication Error easily.

What Problems Do You Face If Epson Communication Error Takes Place?

These are some common problems and small glitches that you might also face if communication error takes place. Have a look below:

• You will come to see an error says Epson Communication Error.
• You will get faint printouts from your Epson printer.
• Your Epson printer makes problems while printing any documents.
• You often come across ‘Printer paused’ error message while working on your printing machine.
• Your Epson Printer doesn’t scan anything.

All such things happen when your Epson printer is creating difficulties while communicating with your computer system. However, Epson Communication Error can occur due to many reasons which are available below:

Some Common Reasons As To Why You Are Facing Epson Communication Error:

Check the main reasons so that you can properly determine why such problems are happening with your printer:

• The damaged power cord of your machine.
• There is a fault in the electric socket where you plug the power cord of your printer.
• A network issue can also be one of the major reasons behind the occurrence of such errors.
• Your Epson printer is not able to communicate with your computer system.
• The faulty interface cable of your Epson printer can also cause communication errors.
• A broken printer might trigger the same errors.
• Improper setup of your application software.
• Less secondary memory of your computer system.
• Windows operating system is not compatible with the Epson printer.

After analyzing the reasons for your Epson Communication Error, you should for the solutions. Here are some feasible solutions through which you can fix such errors effortlessly.

Advanced Solution To Fix Epson Communication Error:

Things to make sure of before you implement advanced troubleshooting:

• Firstly, you need to check the power source and power cables.
• Make sure, all the chords of your Epson Printer are working properly.
• Also, you should consider that the internet connection has no interruption.

If everything is fine, you should now move to the further troubleshooting step.

Solution 1:

Give A Quick Restart To Your System And Epson Printer

To fix Epson Communication Error completely from the root, you should turn off your computer system. Also, you need to turn your Epson printer off and remove the USB cables to disconnect your machine. Now, wait for a couple of minutes and then turn your computer system on. Now, you should connect your printing machine to your printer using a USB capable. See whether it is showing any communication error or not. If yes, then you should go for the next step.

Solution 2:

Uninstall And Then Install The Driver Of Your Epson Printer:

• Press the ‘Start’ button on your first step.
• Next, you will get access to the Start menu and then navigate to the Control Panel.
• Further, you should click on the ‘Devices and Printers option and click on the ‘Epson Printer’ option.
• You should right-click on your printer to open the ‘Properties’ option and then click on the drivers’ tab.
• Opt for the ‘Uninstall’ option and you will come across a set of instructions.
• Now, you should follow the instructions to download the Epson printer driver by visiting the official website of Epson.
• Further, you should go through the on-screen steps to install it again so that you can work efficiently.

Solution 3:

Start The Printer Troubleshooting Operation:

• First of all, you should go to the start button to access the ‘Start’ menu.
• In the next step, you should opt for the ‘Control Panel’ and move further.
• In the search box, you will have to type the troubleshooter.
• Now, you should click on the ‘Troubleshooter’ option and then navigate to the ‘Hardware and Sound’ option.
• Opt for the ‘Printer’ option and then click on the ‘Troubleshoot’ option.
By implementing these steps, you will be able to start the epson printer troubleshooting process.

Solution 4:

Consider Updating Your Windows OS:

• At first, you should go to your computer system and press the ‘Start’ button to access the ‘Start’ menu.
• In the Search box, you need to type Windows Update and then click on the ‘Windows Update’ option.
• In the next step, you will have to log into the ‘Admin User’s Profile’ using your login credentials.
By following these steps, you can update your Windows operating system and check if Epson Communication Error still occurs.

How Does Epson Support Number Help In Rectifying Communication Errors?

Even if you’re facing the same errors while working on the Epson printer, you should take assistance from the reliable source. For that, all you need to do is to get in touch with the Epson troubleshooting experts. By establishing a connection between you and the experts via Epson Support Number, you can share your problems. Here, they will suggest you some suitable solutions to handle communication errors of your printer.
Therefore, whenever you encounter any issue with your Epson printer, approach the experts, and ask for help. Moreover, if you are also looking for more about the same, visit our website at any time.

Canon Printer Wireless Setup And Installation

 Get The Details About Canon Printer Wireless Setup and Learn How To Setup Canon Printer to WiFi on Mac and Windows Device

Although there are multiple brands of printers in the market, Canon is the first choice of users when it comes to perfect print. Canon is well-known for its high-quality printing. In order to use the printer, the first step is its setup.

Setup Of Canon Wireless Printer

If a user wants to know how to setup Canon wireless printer, then it can be easily carried out by following a set of instructions. Canon printer wireless setup is used to connect a user’s computer and the Canon printer via a wireless network. If a wireless connection is established, there will be an advantage of printing anywhere using the device. If a file is saved in the device and it needs to be printed, just select the file and get it printed.

Canon Printer Setup Wirelessly

Thinking about how to set up a Canon printer on your Mac, Windows, iPad, iPhone, iPod, or Android phone? Essentially download the “Canon PRINT App”, press your printer wireless to connect button, and the information stored on your device, including your WiFi password and name, will automatically be moved to make the setup process quicker and simpler than any time.

Different Methods WiFi Setup of Canon Printer

The two methods used in wireless connection are the WPS method and the standard connection method. When a user is looking for a Canon printer setup, any of these methods can be used for the connection. Ensure your Canon printer is capable of connecting with the Internet before proceeding.

WPS Setup Connection Method: This method is commonly used for Windows and Mac operating systems. The wireless router has a push button for WPS. Check for the wireless connection settings on the computer and then enable WEP security. Below mentioned are the steps to connect Canon printer to Wi-Fi:

• Turn on the Canon printer and place the router nearby so that the WPS button could be in reach.
• Hold the WiFi button on the printer till the light is ON.
• After waiting for 2 minutes, hit the WPS button on the router.
• When searching the network, the blue Wi-Fi light is on. Once connected to a wireless network. Power and Wi-Fi lights will be still.
• To check the connectivity, try printing a page from the Canon printer.
• Put the sheets into the printer and check if the printer works properly.

You’ve finished connecting your Canon printer to WiFi network. Have a go at printing a test page and it should work. These steps will help the user in Canon printer wireless setup.

Canon Standard Connection Method: If the router does not have a WPS feature, use this method. Below mentioned are the guidelines when a user wants to know how to setup Canon printer using this method.

Network Settings:

• Connect the computer to the printer for network settings.
• Load the input tray with papers.
• Press & hold the resume or cancel button for a few seconds.
• In the printout of the information page, check the connection status.
• Verify the network name also.

Initial Preparation:

• Ensure that the printer is switched on and properly connected for setup. For wired connections, an Ethernet cable is required.
• Check if the required drivers are already installed on the system.
• Connect the printer to the internet and check its speed.
• In the case of a router, connect the computer and printer to the router.

Canon Printer Setup For Windows OS

• Click on Start and then Settings to open it.
• Then, Devices is clicked in the Settings window.
• Under this option, select Printer and Scanners and then choose the option of
• Add the printer or scanner. This will add a printer to the list.
• Connect it to the same network as of printer.

Complete the set up on your device by following the above steps. When the setup is finished, you’ll have the option to start utilizing your printer. Finally, the printer can be used for printing from Windows, and a Canon wireless printer setup is completed.

Canon Printer Setup For Mac OS:

• The first step is to choose System Preferences and select Printers & Scanners.
• Select + symbol to add the printer.
• In the available list, select the printer and add it.
• In the case of a router, connect the Mac device and printer to the same network.
• To ensure the connection, take the test print.

Connecting Canon Printer to WiFi Router without using WPS Button:

• Install ‘Canon IJ Network Device Setup Utilities and run the application.
• Turn on and connect the printer through USB.
• Select connection option USB and complete the connection process.
• Now change the connection option to IPv4.
• Enter the printer password which will be the serial number of the printer.
• Select the wifi network and enter the wifi network password and complete the connection process.
• Now the setup is complete.
• Remove the USB cable and Add Printer through the Add a device option in Control Panel.
• The printer is ready to use.

To know more about Canon printer WiFi setup or for any other query, the canon printer support team of Canon can be contacted. The executives in the customer support of Canon will provide all the required assistance to the users. The details of contact using which the support can be reached are available on the official website of Canon.