Step By Step Guide to Fix U052 error of canon printer

 A lot of Canon printer’s users come across with the error message, “U052 This type of print head is incorrect.” It is a very common error on Canon printers and is fairly easy to troubleshoot.

There are two different scenarios related to U052 kind of error message.One is where the print head is not installed at all and then it is giving the ‘U052 This type of print head is incorrect’ error message.

And, the second scenario is where the print head is installed nut it is not functioning properly or probably not working at all. The below section will show step by step canon printer troubleshooting of both the scenarios.

Getting Error U052 with Print head installed

1. Open the top lid of the printer in order to access the printer’s cartridges and the print head. When you open the top lid, the cartridges slot will automatically lift up to the middle front of the printer.

2. Unplug the printer from the switch board. Make sure that the cartridge lever located just on the side of the cartridge cradle is lifted up. In this position of the lever, the cartridge slot will not auto move.

3. Remove all the ink cartridges from the cartridges slot.

4. Removal of cartridges will expose the black print head. Now just gently remove the print head from the printer. The technique to remove the print head is to grab it just where the cartridges are to be inserted, pull it gently and the print head will come out.

5. Then perform the basic cleaning cycle on the print head.

6. Reinsert the print head and the ink cartridges into the printer and make sure that there are no open doors and the lever is back in place.

7. Close the top lid of the printer.

8. Switch ON the printer.

9. Take out a test print in order to check if the canon printer Error U052 is resolved.

Getting U052 Without Any Printhead Installed

1. Switch off the printer.

2. Open the top lid of the printer. If there are no cartridges or print head in the printer, then the positioning of the cartridge slots would naturally be in the middle front of the printer with the lever lifted up.

3. Install the print head in to the sliding rail just beside the cartridges slot.

4. Install the cartridges into the cartridge slots. Close the lever and make sure that there is no open door and the cartridges and the print heads are properly installed.

5. Close the top lid of the printer.

6. Switch ON the printer.

7. Take out a test print in order to check if the Error U052 is resolved.

8. In order to resolve the Canon Printer error ‘U052 This type of print head is incorrect’, the troubleshooting approach given above would work in case of either of the scenarios. If the problem persists, then contact Canon printer customer service or a printer technician.

The Procedure For Brother Hl-L2360dw Drum Reset

Brother is one of the most popular printer brands which produce a wide range of printer model in which Brother HL-L2360DW is the most preferred one that offers quality features and high-end printing. But sometimes, the users face some issue with their Brother Printer especially when they have just replaced the toner cartridge and still get pop-ups warning to replace the toner. You have taken out the toner cartridge and checked if everything is working. You perform a lot of effort to resolve everything but you still get that irritating message. No needs to worry, you only have to reset the counter and the problem will be solved. However, you can also take the help of technical experts who will suggest some of the effective ways to solve the problem in the least possible time. All you need is to call at our BrotherPrinter troubleshooting where you will get instant support with a bunch of effective solutions.

Simple Steps to Reset the Brother HL-L2360DW Toner

·         Open the front cover of the printer and leave it for some time.

·         Now, turn off your Brother Printer.

·         Press the GO button while turning ON the printer and hold it for some time.

·         After some time, release both the button.

·         Now, press the GO button option for some time. The LED will flash once.

·         After that, press the GO button option 5 times.

·         Then, Close the cover, the toner will be reset.

 

However, if you still face the same issue or have any other query related to Brother Printer then contact our BrotherPrinter Customer Service Number where you will get instant support to solve the problem in short span of time. We have a dedicated team of experts who are available 24 X 7b in order to provide reliable support to our customers. Feel free to get in touch with our experts as we believe in complete customer satisfaction.

 

Hp Printer And Scan Doctor | Windows and Mac

 

• The HP Print and Scan Doctor is a reliable diagnostic tool for HP printers and it's completely free and up for grabs.
• Check out this full guide to see how to properly download, run, use and even uninstall the tool when you no longer need it.
• Make sure you keep our Printer Errors Guides near for future reference.
• Check out more detailed products' reviews on our Download Hub.

·         How can I use the HP Print and Scan Doctor to repair printer problems?

·         Now, using the HP Print and Scan App to troubleshoot your printer is quite straightforward. Here are the steps:

You need to download the diagnostic program to your Windows PC first. Here is how:

1.   Switch on your printer and ensure it’s connected to the PC

2.   Download the software.

The file is light so the download completes within a few moments. Up next is installation.

 

The software tries its best to resolve any incorrect printer configurations, print quality and related HP printer issues.

However, no software can replace a support technician so may still need to escalate some of the advanced problems to HP agents or qualified technicians.

That said, you may no longer need to call a technician with each small problem thanks to this software.

How To Delete HP Print and Scan Doctor

To delete the tool, follow these steps:

1.   Navigate to the program’s current file location e.g. the desktop.

2.   Right-click on the HP Print and Scan Doctor icon.

3.   Choose Open file location.

4.   Click Delete.

For Any Further information cal our hp printer customer service number 817 442 6637

Effective Steps to fix Error t6710 of Epson printer

T6710 Epson Printer Error mainly happened while replacing the ink. Usually T6710 Ink Maintenance Box stores ink which gets flushed from system during print head cleaning.

To fix issue instantly call Epson Printer Troubleshooting Number 

Steps to Fix Epson Printer Error t6710:-

Step 1: Take out the maintenance box & uncover from its box

Step 2: Open the back cover by hitting the tabs

Step 3: Pull out the maintenance box

Step 4: Place the used maintenance box in the flexible bag that came with the new maintenance box. Seal the bag & place of it carefully.

Step 5: The new maintenance box is insert into the holder in space from where old was taken back & push it all new the way in.

Step 6: Shut the back cover after the well inserting the new maintenance box.

In case you are facing issues to fix Epson Printer maintenance ink box with cartridges users are welcome to get in touch with Epson Printer Customer Service expert. Here users can find most efficient, qualified, technicians who will help in right way online. Connect through phone call with technicians to any hour of day & night.

Steps to resolve Epson error code 0xe5

 Epson is a sought-after brand when we talk about printers. The unparalleled feature offered by Epson printers makes it a popular choice among customers. At times, due to some issue in the hardware or software, the printer may showcase an error. One such banal glitches faced by the Epson printer is the Epson error code 0xe5.

This error hinders all the ongoing print functions and needs to be resolved immediately for the smooth functioning of the Epson printer. If you are bugged by the error 0xe5 on the Epson printer, this article has got your back. The article enlists easy steps to mitigate this problem.

What is error code 0xe5 on an Epson printer?

The Epson error 0xe5 is an issue that stems due to obsolete drivers or a virus attack. Some other factors that may contribute to this error include

• Hardware failure
• The problem in the encoder strip
• Stuck bits of paper
• Faulty installation of the printer

How to repair error code: 0xe5 Epson printer

1. The first step asks for the user to inspect thoroughly the encoder strip. If any foreign material is found on the strip, using a soft surface wipe it clean.
2. Cross-check whether any fragments of paper are hindering the smooth functioning of the printer. If any such bit is found, cautiously remove it.
3. Update the drivers and also confirm the drivers installed are meeting the system requirements.
4. Check the board of the printer for any damages.
5. Also, confirm the printer hardware is installed properly. Confirm the cartridges are set properly to evade the Epson printer error code 0xe5.

Thoroughly verifying the hardware of the system resolves this issue. Once these steps are adopted, try a sample print to check whether the printer is functioning adequately. If this method isn’t efficacious you could implement the second procedure.

Resolving using SmartPCFixer

• Install the SmartPCFixer application on your system.
• Execute a scan once the software is installed.
• After the scan ceases, tap on the ‘Fix All’ option.
• Try a demo operation to check whether the Epson printer not printing is resolved.

In case any problem still lingers, it is advisable to reach out to Epson printer technical support for solving all issues.

How To Fix Brother Printer Error Ts-02

The Brother printer error ts-02 is one of the most frequent printer errors that perturbs the user. There is no doubt that this Japanese printer brand has lodged its name in the list of best printers; but like all devices tend to be swayed by a printer glitch, the Brother printer also has the propensity to incur an issue.

This prevalent error code emerges when there is an inability to establish a link between the WLAN access point/ router and the MAC address of the printer. Some other reasons for brother error ts-02 include corrupt system files, faulty installation of the printer, and incomplete deletion of certain files. If you are bugged by this brother printer problem, you are in the right place. This article provides a quick and efficacious way to resolve this error code.

Procedure to mitigate Brother printer error ts 02

1) Ensure there is a connection between the printer and the WLAN access point/ router.

2) Connect the printer to the internet. Verify that there is a strong network. If there is weak connectivity, chances are you might encounter this error.

3) Keep the printer in the vicinity of the network. Place the printer within a radius of 3.3 ft from the WLAN access point.

4) If there is an issue in the MAC address filtration, confirm whether the MAC address is enabled. You can get hold of the MAC address in the Network Configuration window.

5) Navigate to the setup wizard in the control panel of the printer and set the standard radio signals. The Brother printer operates at a radio signal of 2.4 GHz.

6) Fit in the correct SSID of the network in the printer settings. Also, try performing a power cycle to resolve this issue.

If the Brother printer error ts-02 prevails even after implementing the designated procedure, it is advisable to reach out for Brother printer support.       

Epson Error Code 0x69 |Dial.(817) 442-6637 Epson Technical Support

 The Epson error code 0x69 is one of the most prevalent Epson printer error codes that perturbs the users. The primary cause of the printer error code 0x69 is misconfiguration of the files in Windows.  The issue can also appear due to some other reasons, which include the inability to access the files, the registration of the Epson printer is denied, the access is violated, and some essential files and components are missing.

If you are facing Epson wf-3640 error code 0x69, take a sigh of relief. This article would enlist some undemanding procedures to mitigate this issue; the best part being you could implement them without requiring technical adroitness.

How to Fix Epson printer error 0x69?

Execute the given below epson troubleshooting guide steps to fix the error code.

Method 1: Performing a power cycle

• Switch on the printer and during its booting process turn it off.
• Halt for 15 minutes.
• Turn it on again.
• Check whether the error code 0x69 Epson printer is resolved. If the issue persists, chances are there is a glitch in the hardware. Follow method 2 to fix it.

Method 2: Updating the OS

• Ensure your PC is switched on and in the Search box, type “Windows Update”, and press Enter.
• Select the Windows Update option to initiate the process.
• Once the updating process terminates, restart your system, and sign-in as the admin.
• Click Start > All Programs > Accessories.
• Navigate to System Tools, followed by System Restore.
• A window shall appear. Choose the “Restore my computer for an earlier time” option.
•  Select the latest system section window. Tap Next and follow the onscreen instructions.
• Restart the system to confirm whether the Epson error code 0x69 is sorted out.

The above-mentioned procedures are easy and effective methods to resolve this printer error code. However, if you are still facing an issue it is recommended to seek Epson printer technical support. 

Download HP Solution Center 817 442 6637 Easy Guide

 The world has been treading on the path of technological development. The last few decades witnessed the metamorphosis of this world into a technology-laden one.  There are gamut multinational companies who have contributed to this development and HP is one of them.HP through the realm of time has established itself as a reliable brand and the number of HP users has proliferated ever since. If you are also a proud HP customer and possess HP devices including HP printers, you might access the services of the hp solution center.

What is HP solution center?

The HP solution center is your go-to place for finding solutions to all your HP printer issues. It is a free tool offered by HP and was provided before 2011. It performs various tasks ranging from scanning a document to ordering supplies; inspecting the ink levels to various other tasks.

Is there an HP solution center windows 10?

The HP solution center is a specialized software developed by HP and was prevalent in systems before 2011. The latest version of the HP solution center was launched on 27th September 2009. The latest version of the software was known as HP Solution Center 13. This variant was compatible with all versions of Windows including Windows 10.

Also Read:: Hp Troubleshooting

Does Solution Center work with Windows 10?

If you have purchased Windows 10 before 2010, then this would work adequately. If you have bought a system working on Windows 10 after the year 2010, the HP solution center shall not work on the system.

 Why should I download ?

A printer is a quintessential tool that performs a myriad of tasks ranging from scanning, printing, copying, etc. To perform these tasks optimally it is suggested to download the HP solution center software. This software only gives pointers about the level of ink in the cartridges, stating whether the cartridges need a replacement. The solution center also contains articles related to prevalent HP printer errors and the troubleshooting procedure to resolve them.

How to download on Windows 10?

On any windows, including Windows 10, you could download the it as a part of the Windows full features software from the official website of HP. There isn’t any separate link available on the official website to download.

Also Read:Epson Error T6710

How do I install ?

 Once the software is downloaded, to install it do as follows:

1. Switch on the printer and disconnect the printer from the system.
2. Open the downloaded software.
3. If the Let’s identify your product to get started pops, select printer, type your model, and tap Submit.
4. If you are required to change the version of the OS, you can do so by clicking on the Change option.
5. Beneath the driver option, select download to install the drivers.
6. You shall be prompted to choose either typical or recommended installation, make your pick, and follow the onscreen instructions to finish the process.

Is this available for mac?

Unfortunately, this isn’t for Mac. For Mac, there is a software titled HP Utility which is similar.

Facing the issue of the solution center for hp not working?

If you are facing this issue or a similar kind, it is advisable to reach out to the HP printer technical support team. The support team comprises experts and shall be efficacious in resolving all your issues. 

FIX Canon Error 5200 Code 817 442 6637 | Canon Support

 Undeniably Canon provides some of the best printers to users across the globe, and its sleek design and user-friendly applicability make it a top choice for printers. With prolonged usage of the printer or due to using it for a long time, the Canon printer might erupt some issues. One such is the canon error 5200.

What is error 5200 on the canon printer?

The canon printer error 5200 emerges when the levels of ink in the cartridges is dwindling or when there is a faulty installation of the cartridges. The canon error 5200 could also allude to a glitch in the logic board of the printer. If you have also incurred this issue in midst of your printing action, this article shall throw some light on effortless procedures to resolve the 5200 error of printer.

How to fix canon error 5200?

If you are seeking some easy, quick, and efficacious steps related to mitigating printer error 5200, you are at the right place. Given below are 10 troubleshooting of canon printer steps to solve this problem.

1. Ensure to turn off the printer.
2. Press and hold the STOP/RESET button.
3. Press the On button and while pressing it, release the STOP/RESET button.
4. While you are still holding the power button, double press the STOP/RESET button.
5. Let go of the power button and halt till the “idle” message is displayed.
6. As soon as the “idle” message appears, remove or open the top cover of the printer.
7. Dismount the cartridge cover and the cartridges.
8. Set the cartridge cover and switch off the printer.
9. Place the top cover of the printer and turn on the printer.
10. Once the initialization process of the printer is complete, place the cartridges in the right position.

If you carefully follow these 10 steps, the printer error code 5200 shall disappear. In case you are still bugged with the error code, it is suggested to reach out to support for canon printer. 

Canon Printer Error 5b00 |(817) 442-6637 Follow To Fix

 The Canon printer error 5b00 is one of the most pervasive errors bugging Canon printer users. when encountering this error, the printer shall boot normally, but all the printing and scanning operations shall halt. This error usually alludes to the faulty usage of ink cartridges.

If the error code 5b00 is disrupting your printing operations and want a quick and easy fix to this error, you are at the right place. This blog provides a quick and easy solution to fix this issue.

How to fix Canon printer error 5b00?

1) Resetting the waste ink counter

The Canon printer 5b00 error usually occurs due to ink spills and can be resolved by resetting the printer. To implement this step simply and unfasten all the connections to and from the printer. turn off the printer and open the cartridge door. Press and hold the power button while plugging in the various cords. Once all lights are lit up, you can release the button. Double press the power button and wait till the green light stabilizes. Close the cartridge door and voila, you are all set to use your printer.

Also read:: Brother printer error light

If the canon error 5b00 continues, you could execute the second method.

2) Cleansing the waste ink pad manually

Open the ink cartridge segment of your printer and dismantle the power cord of the printer. Carefully remove the cartridges. Locate a tiny square part resembling a foam pad.  It is situated behind the white rollers. Gently pull out the pad and using a clean soft towel wipe it clean. Set it again, followed by installing the cartridges. Press and hold the power button, while fastening the power cord. After halting for 5 seconds, tap the power button again to reset the internal memory and rectify the 5b00 error of the canon printer.

If the above Canon Printer troubleshooting procedures weren’t that efficacious, fret not. Our team of experts has got it covered.

Simply dial our Canon Printer support number (817) 442-6637 and leave your printer error on us to fix it. I hope this blog was helpful. 

Also Read: 

Phone under 17000
Best Smartphones Under 70000.
How to Apply For PAN Card
How to Hide App In iPhone 13

Flashing Error LED? Brother Printer Error Light | Dial 817 442 6637

 Users of Brother Printer, at times, are perturbed by the flashing lights in the printer. This is one of the prevalent error codes and usually comes forth when the drum counter isn’t installed in the correct orientation or place. If you are rattled by the brother printer error light issue, you can take a sigh of relief! This article provides some expeditious methods to sort this error.

Brother troubleshooting steps to fix flashing lights error

The 2 quick and easy solutions to solve this glitch are as follows.

Resetting the drum

1. Dismount the cartridge and drum unit.
2. Halt for at least 10 seconds.
3. Place the drum unit and cartridge in their accurate position.
4. If the drum LED flashes, it indicates that the drum printer hasn’t been reset.
5. Tap and hold the Go button, until all 4 LEDs light up.
6. Once they illuminate, you could let go of the Go button.
7. Close the cover and voila, your drum unit is reset.

Also Read:: Brother Printer Not Printing

Inspecting the printer unit

The Brother printer all lights flashing glitch could also step because of fault cartridges or some other hardware glitch. Inspect whether all cables are connected properly. Also, ensure that the drivers are up-to-date. You could also try to reset the cartridges as follows:

• Unbolt the top panel, unlatch the cartridge lock chips, and remove them carefully.
• Halt for a minute.
• Set one cartridge at a time inside and close the printer.
• Try a demo print. If the error subsidies, insert the other cartridge as well.
• Close the printer and your printer shall function properly.

Still, facing an issue?

If the methods stated above didn’t fix the brother printer error light, fret not. You can dial our Brother printer customer Support and leave your worries on us. Our experts shall confer instructive advice that shall resolve your issue.