The Hewlett-Packard Company, commonly known as HP, needs no introduction. Time and again HP has established itself among the top-notch brands in the field of development and manufacture of hardware as well as software along with providing services. One product of HP that is loved by customers across the globe is its range of printers. Making use of some advanced technology along with making it affordable are two prime factors why it is a hit among global customers. Like all technological devices may incur some glitch, so can HP printers. But no need to fret; the good news is that major issues can be resolved by following some simple steps. This article talks about somecommon HP printer errorsand how to fix them.
HP Printer Paper jam
HP printer paper jam is one of the errors that users may happen to encounter throughout their usage.
Fix:
Turn off the printer.
Carefully open the printer head.
Find the stuck bits of paper and carefully remove them.
This error could allude to an issue in the cartridge, printer head, or software/driver.
Fix:
Try cleaning the printer head using warm water and a tissue roll.
Check the level of ink in cartridges.
Try changing the printer settings as it may trigger the printer to start printing.
Ensure the tape in the cartridge has been pulled out.
hp printer error code
Although HP printer error code could mean various other things, it is suggested to do as follows to tackle the majority of the error codes.
Fix:
Try resetting the printer. To do so, turn off the printer.
Detach all USB cables as well as power supply cables.
Wait for 5 seconds.
Press and hold the power button for 5 seconds.
Connect the power supply as well as the USB cables.
Confirm whether the error code has been mitigated, if not, simply reach out to our hp printer support number.
HP printer not printing color
This issue is similar to the error of the HP printer not printing black. Try to implement the fixes mentioned there and check whether the issue has been resolved. You could even invoke the HP printer troubleshooting option to detect and fix the issue.
The above mentioned are some common errors and how to fix them. It is advisable that if you happen to encounter any kind of issue and the above-mentioned procedure doesn’t seem efficacious, reach out to us by dialing our hp printer support number.
Brother printers are one of the popular choices among users owing to its fine technology and affordability. However while using them, users encounter a message ”Brother Printer in Error State” which can hamper the printing operation. If you happen to encounter a similar issue and need assistance to resolve it, then you are in the right place.
Reasons why Brother Printer in Error State emerges?
Some of the common reasons why the printer in error state pops up are as follows:
BIOS glitch
A malware or virus attack
Drivers get corrupted
Connectivity issue
Unfastened or loose wires or USB
A glitch in system files
The drivers are not updated
If you encounter this issue, don’t worry. Given below are some Brother printer troubleshooting steps that can help resolve this issue.
How to resolve this Brother printer error?
Step 1:
The first and foremost step is to ensure your printer is getting an adequate power supply. Next, ensure the printer is well connected to the computer as well as is getting a strong Wi-Fi network.
If making use of a LAN cable, confirm whether the connection is firm.
If using a wireless network, disconnect the printer and try to re-establish the connection.
Turn off the printer and switch it on again to check whether the Brother printer error has disappeared.
Step 3: Resolve Parallel Port Settings
Usually, when Windows are updated, the parallel port settings can be altered resulting in this error. To fix the parallel port settings, do as follows:
Navigate to Device Manager.
Locate the parallel port settings.
Double-click to open the properties tab.
Select the Port Settings tab.
Choose “Use any interrupt assigned to the port”
Click Ok.
Step 4: Check for any malicious software or virus
It is recommended to run a virus scan to tackle this error code. After the scan is completed, remove the virus or malware.
Step 5: Verify whether Printer Spooler is running
Press Windows + R. In the command box type services.msc and press Enter.
Navigate to Printer Spooler and tap on it.
Ensure the setting is automatic and running.
If not, try to alter it.
Select the Recovery Tab and edit the first failure to “Restart the services”.
Choose Apply and check whether the error has been resolved.
Step 6: Re-install the printer drivers
If nothing else works, try reinstalling the printer drivers.
Visit the Control Panel, find the system file, uninstall the drivers.
Download the printer drivers and install them. Adhere to the instructions displayed on the screen.
The above-mentioned steps shall resolve the error code. However, if any issue persists it is advisable to dial our Brother printer customer service. Our team of experts work round the clock and are always ready to resolve all your printer related queries.
You have given a printing command to submit that last-minute presentation and halfway through an error code b203 appears, and your printing operation comes to a halt. Pretty annoying, right? If you are facing theCanon printer error b203, you are not alone. A lot of users experience the Canon printer b203 error and this error could allude to some minor issues in the printer like a paper jam, a need to update the software, or a non-potent connection between the system and the printer.
Given below are some easy and quick fixes that shall resolve Canon printer error code b203.
1) Run a Power Cycle
Switch off your Canon printer and unfasten the power cable from the wall outlet.
Try to turn on the printer by holding the power button for approximately 60 seconds.
Fasten the power cord to the outlet and the device
Switch on the power supply.
Run a sample print to check whether the canon printer error has been resolved.
Turn off the printer and take out the cartridges. Check whether the level of the ink in them is adequate.
If the level is low, refill them.
When installing the cartridges, ensure they are set at the correct position and in a proper manner.
3) Ensure a sturdy network connection
Verify whether the printer is receiving a strong network. If you are making use of a wireless printer, try to re-establish the connection.
4) Eradicate paper jams
Remove all the torn bits of paper by opening the front cover.
If you spot any hindrance between the front cover and the paper feed tray, clean the blue thumbwheel by turning it out.
Run a demo print and check whether the Canon error b203 has been fixed.
5) Updating the drivers
Press the Windows + R keys simultaneously.
In the run dialogue box, type devmgmt.msc and press enter.
The Device Manager window shall open.
Search printer drivers, right-click on it and select the Update driver option.
Once the updating is completed, restart the device to keep the changes.
6) Evoking Windows Troubleshooting
In the search bar, simply type troubleshoot. This tool shall detect the issue and fix it. This tool is beneficial for Canon printer troubleshooting.
The above-mentioned methods shall resolve the canon printer error code b203. However, if an error persists, feel free to reach out for canon printer support by dialing our toll-free number. Our delegates shall surely help fix your issues.
Canon is a Japanese MNC popular for its supreme quality of the scanner, cameras, printers, semiconductor equipment, etc. Canon has established itself as a reliable brand when we talk about printers. One printer that is a hit among the masses is the Canon IP110 printer. Installing the Canon IP110 Driver will make you ready to make use of this phenomenal device. If you are perplexed about thesetup Canon IP110 printer, then this article will help you.
Step 1: Unboxing and initialization
Canon provides a lot of precautionary packing, so the first step is carefully removing all packing material and tapes from the printer.
Set your printer at a clean and safe place, and also at a place where it receives adequate Wi-Fi.
Fasten the power plug and connect it to the wall socket.
Insert the cartridges in the correct position and also a clean, undamaged stack of paper. Run a sample print.
Once these steps are done, the next step is the Canon IP110 Driver Installation. The drivers can be installed from the official website of Canon.
The installation of the Canon printer driver is a very crucial step. You could either download the driver from the CD you received along with the printer. You just have to double-click on MSETUP4.EXE and follow the next instructions.
If you are installing the driver from the Canon website, simply navigate to the Canon IP110 driver installation page. Double-tap on the driver. Once the driver is installed on your Pc, open it, and follow the instructions as mentioned.
Step 3: Connect the printer to your OS
While the driver is getting installed, ensure to select the wireless LAN method as connection and click Next.
Choose the access point network and tap Next.
Verify the printer is switched on and then click Next.
If the set-up is for the first time, select the option “Setting printer could not be found on the list” and press Next.
Do as the instructions guide.
In the setup procedure selection page, choose Cableless setup and press and hold the Wi-Fi button on the printer until the light flashes 2 times.
Keep pressing the Next button and select your location when asked.
Agree to the license and once done, click exit.
The above-mentioned steps are a comprehensive procedure to setup Canon IP110 printer. However, if you are stuck on a step or incur some other issues, feel free to seek out Canon printer support. If you need some expert help, please feel to dial our helpline and we assure our delegate would provide you with the best canon printer troubleshooting procedure.
HP is one of the sought-after brands when we talk about printers. HP offers a wide range of printers suitable for all utility and affordability. At times, due to some glitch in software or hardware, the printer might incur some errors. Usually, the cause of an error code is perspicuously displayed on the monitor. However, if an error is ambiguous and you are in mayhem to resolve it, this article provides comprehensiveHP printer troubleshootingretorts which are usually adopted to resolve various kinds of HP printer errors.
Step 1
Ensure that all connections to and from the printer are well fastened. If you are uncertain, simply switch off the printer and remove all the connections. Reconnect the cables and switch on the printer to check whether the HP printer error code is resolved.
Step 2
Confirm whether the cartridges are functioning properly. Check whether the ink level is adequate in the cartridges. If the level of ink is sufficient, just unmount the cartridges and position them in the correct position. If the ink is dwindling, replace the existing cartridges with new ones.
Step 3
Verify the HP printer software is working properly. If the device is unresponsive when given a command, uninstall the software and re-install it.
Step 4
Check if the firewall settings of the system are causing an issue. If so, open the firewall preferences and enlist the executable file of the printer software (*.exe) as an exception or simply disable the firewall settings for the time being.
See that the print settings in the printer software are set properly. Confirm the printer margins are right, and the paper size, paper type, and type of document to be printed are suitable for the printer.
Step 6
Align and clean the ink cartridges. Navigate to HP Solution Center or the HP printer software in your system to get hold of these maintenance properties.
Step 7
In the right bottom of the screen, double-click on the HP printer icon. Under “Status” look for any error messages. Right-click on the ongoing processes, and tap on Cancel.
Step 8
Visit the HP website and try locating your printer and your error. Follow the steps mentioned to resolve those issues. You could also find the updated and required software there.
If the above-mentioned steps were inadequate to fix your issue, simply dial our HP printer support number. Our team comprises certified experts who work round the clock to provide the fastest resolutions to all your hp printer errors issues.
You were busy printing out the document required for your presentation tomorrow, and out of the blue the message “Printer is in error state”. Can be pretty vexatious, right? Fret not, the printer in an error state HP can be easily resolved by just executing a few methods. You can also mitigate this issue while chatting with HP Printer Technical Support. If you want to try your hands and resolve the issue by yourself, read on to know more.
What does the HP printer in an error state mean?
HP is a world-renowned brand, making some prolific printers that are in the market. Although HP printers are sturdy, they might encounter some issues. The HP Printer in an error state can spring up owing to myriad reasons like driver being corrupted, an issue with ink, printer being disconnected, the printer being jammed or the printer lead being open. When the HP Printer in an error state message sprouts, it hinders the print commands to reach the printer. The unfastened USB or some error in OS are the main propellants of the HP printer error state.
To fix HP Printer in Error State
Method 1: Uninstalling and reinstalling the drivers
Usually uninstalling and reinstalling the HP printer drivers can be efficacious in removing the HP printer in error state message. The steps for it are
Open control panel.
Select Devices and Printer.
Right-click on the HP printer you are using> select Remove Device and confirm it.
Restart the PC.
After the system reboots, it would detect the printer and install it. If the printer is not detectable, remove the cable, and fasten it again.
Method 2: HP printer Troubleshooting
To evoke the HP printer Troubleshooting function, do as follows:
Verify the power supply to the printer is fastened properly.
Ensure the USB connection (for wired printers) and Wi-fi connection (for wireless printers) is adequate.
Thereafter, if the issue persists, the probable reason is Driver. To tackle the issue related to a driver,
Click on start.
Select ‘, Device Manager’.
Expand the printer’s option and locate the printer in use.
Right-click on the located printer, and select ‘Update Drivers’.
Method 3: The printer is in Offline State
The HP printer error state might emerge due to the printer being in an offline state. To make the printer online,
Select Start> Control Panel.
Choose Devices and Printer
Check whether the printer you are making use of us shows Ready. If so, it means the printer is online.
If not, then right-click the printer you are using, and select ‘Use printer online’.
Method 5: Using Print Spooler
Press Windows + R.
Type services.msc and click enter.
Scroll down and choose the print spooler service by double-clicking on it.
Confirm whether the services are started and the default setting is Automatic.
If not, then make the setting to automatic, and start the service.
Click on Recovery Tab, modify the first failure option to “Restart the service”.
Choose the apply option.
The above-mentioned methods are some effortless procedures that can be utilized to resolve the HP printer in error state. Even after going through these steps, the printer is in error state HP persists, feel free to contact HP Printer Technical Support. I hope the article helped provide some fixes to the printer in error state hp.
Brother Printer All Lights Flashing – This usually happens when your Brother printer interrupts your printing session. A continuous blink or flashing light is a signal that the printer is not working properly. When your printer encounters a red position, amber paper, drum light, all the lights flash together, the printer turns off and then turns on again without any reason. An error message appears on the display screen which says “LED lights flash together”. Also, you should not put printer safety at risk and follow these solution steps to solve your printer error. Help.
Effective solution to solve all the LED lights of brother together:
Brother Printer All Lights Flashing – At this point when each light is blazing simultaneously, turn off the printer power, hold for 5 seconds, and then turn on the printer control once again.
There are various ways to handle this error. But complexity can give you stress and anxiety. So it is better to stay on the blog to avoid unwanted troubles. Else Brother Printer troubleshootingNumber is a better idea to deal with such situations.
Turn off your brother printer.
Press and hold the GO button for a few seconds. Also, turn on your printer.
Release the GO button until the toner light flashes.
Press the GO button once more until the paper light turns on.
Now release the button and check if the problem has occurred.
There is a brother HL-5370DW that all the lights went flashing. According to the place of repair of a printer I called, they said that it usually means either a power supply or a main board space is needed. Brother says that its warranty has expired, however the serviceman gave me the impression that Brother had some issues with these issues and extended the warranty on some things.
Id just take it to a place of repair, but the nearest place I can find is more than an hour away. So I thought I could do a little research to see if I could do it myself – the ones that lead me to this place.
So it appears, I need to know how to test the power supply for the printer, to know what is bad or not, and if not, I think a main board for it Is the order of I hoped to find some more information online, but I guess I am not surprised that there is much to be found.
Any suggestions for finding information about the best way to proceed with the diagnosis, testing the power supply, or input?
Currently, when you power on the printer, the fans come on, the lights on the display light are normal, then they go out and then the status light turns green for a split second, and then they all start flashing.
Brother HL-21702130 – All four lights flashing
All four lights flashing on Brother HL-2130 mean severe printer flaws. You can find out what the real problem is by pressing the Go button on the printer.
Lights on the printer must be changed:
A bus error light means a main PCB failure.
Bus toner light means failure of the fuser unit.
Just drum light means laser unit failure.
Toner and error light mean main motor failure.
Toner and drum light mean high voltage failure.
Drum and error light means fan failure.
Toner, drum and error light mean zero cross failure. Unfortunately this means contacting brother for repairs.
Grab 24 * 7 Brother Printer Customer Support Number for immediate solution:
If the LED lights are flashing together, there is a problem, then call our Brother Printer Customer Service Number + 1-800-436-0509. Here we offer hands-on information to solve the problem. Apart from this, our support team will also guide you which solution will be better. Call now, take advantage of this opportunity and relieve you of stress.
A printer that does not recognize a new ink or toner cartridge is one of the most common problems owners experience when changing or replacing empty space, no matter what brand printer you have, and one that our customers often think about us Ask. This can mostly affect your printer when you replace a compatible, remunerated, generic or refilled ink cartridge and you can find a way to fix the issue. Read below why we explain why this happens andHow to Bypass Hp Printer Cartridge Error.
First, try our 9 tips to help solve this problem, then if you need further help then we have tips for specific brands at the bottom of this guide.
What is a compatible cartridge For Hp?
A compatible cartridge is an ink cartridge that was not produced by the original manufacturer of your printer, but functions in exactly the same way as a branded product would.
There may be occasions when after installing a new ink or toner cartridge in your printer, you may see a message on your printer such as:
Your printer says that the printer is not toner compatible. ‘
Your printer says that no printer cartridge is not detected, or that your printer cannot detect ink.
The low or empty level of ink and toner that appears on your computer.
An HP printer with the Cart HP cartridge off ‘or Protection cartridge protection enabled.]
A message on your printer’s warning cartridge no cartridges installed ‘(or words to that effect).
Flashing warning lights on your printer.
Here are the most common reasons why your printer is not recognizing a cartridge:
Internal memory reset needed:
When you install a new cartridge and reset its internal memory, it should ensure that it is displaying full ink and toner levels, etc. However, sometimes the printer just does not do this correctly and believes that there is no old, or no cartridge. , Is currently inserted instead.
Protective strips not removed:
If you do not remove the protective covers or plastic strips that are attached to a new cartridge when you first take it out of its packaging, the printer will fail to register the new cartridge and will cause problems. Take the cartridge out of your printer and make sure that all the strips, tabs, or plastic covers are removed before re-installing the cartridge.
New ink or toner cartridges have multiple metal contacts that connect to the same metal contacts in the printer that allow them to communicate. Dirt or damage on the contacts inside the printer can prevent the contacts from connecting and prevent the printer from reading information on the chip.
HP cartridge protection is enabled:
Whenever you need to update the firmware, if you have an HP printer, an update can be installed ‘to enable cartridge protection’, then prevents these cartridges from working in another printer. Cartridge protection can also prevent compatibles from working in your machine. It can be closed. See how to fix HP cartridge on another printer.
Unlock Hp printer cartridge:
If your Hewlett-Packard printer does not have any Internet features, you can simply go to your printer settings, which can be located on your printer menu and you will see the option to enable HP cartridge protection. Just select the enable option and click Apply and save if necessary.
Incorrect consumable installed in a slot:
A rare occasion but it happens! Putting colored ink or toner cartridges in the wrong slot or buying the wrong cartridge model for your printer is a fairly easy mistake. Also, if a drum or fuser or other maintenance item was accidentally purchased instead of a toner cartridge and installed without a toner, the printer would not work and still needed a new cartridge.
Take all the cartridges out of the printer and check that they are in the correct color slot and that all necessary cartridges are present. If not, reinstall them and turn the printer off and switch back on to reset the system.
An Ink cartridge has not been inserted in its slot correctly:
There is also the possibility that an ink cartridge is not completely clicked on its designated slot and therefore the printer cannot detect the new ink cartridge and displays an error message. All you need to do is re-lift your cartridge cover and double-check each of the inserted cartridges to make sure they are clicked, then close the cover again and try once more.
In the case of toner, sometimes the toner may not sit correctly in the printer slot due to broken plastic parts. To fix this problem you will need to replace the toner.
A printer software update has rendered chip data useless or pasted it with an ’empty’ status
This is one of the main reasons for a compatible ink or toner not working in your printer. Modern printers are automatically connected to the Internet, but PC software or internal printer software (firmware) often needs to be updated at the request of the printer. These updates can often fix bugs but recently printer manufacturers have used the update to prevent compatible printers from working in your printer. Often, the cartridge is not compatible, or the recognized cartridge is not recognized, or like cartridges give a message like empty often.
The remanufactured ink chip can set an empty state for data which means you need to bypass the error. If you have a Hp printer.
DIY steps on how to fix communication error on Epson printer
Is your Epson printer not printing and scanning? Have you received the message 'Printer Paused'? Are you getting blurred and faint printouts during printing? All these problems occur when your printer is not able to communicate with the computer. The following are some reasons and steps to fix a Epson printer communication error :
Faulty power cable
Power socket faults
Loose cable connection
Wrong interface cable
Network problem while using wireless printer
Printer hardware problem
Outdated printer firmware
compatibility issues
Call the help desk support number (800) -436-0509
Before we proceed with Epson printer troubleshooting technical-to-do ', check the connection of all cables connecting the power outlet and printer to other devices:
Uninstall and Reinstall the Printer Drivers
Go to the Start menu and click on Control Panel. Go to Devices and Printers. Look for your Epson printer. Right click on it and choose Uninstall to remove old drivers from your computer. Now, open the Epson website, search for printer drivers under the download section and download the drivers on your desktop. Click on the driver downloadable file and install the drivers. Follow the instructions and once the installation process is complete, restart the system.
Turn off the printer and computer. Check if the cable of your multi-function apps printer is properly connected to the power slot and your PC. Turn on both devices.
Check Network Connections
If the printer is on the network, check the printer's TCP / IP address. Then, try printing the configuration page from the printer's control panel to check if it is displaying a duplicate IP message. If a duplicate IP message exists, update the IP address for the printer. Now, run a network diagnostics test to check the network settings for your printer and PC. On the printer's display, go to the control panel, select Troubleshooting. Go to Network Test and Network Diagnostics so that network test can be done successfully. The test results will be displayed on your printer's display. If it asks the network administrator to contact you, contact your Internet service provider.
Run Printer Trouble-shooter
Go to the Start menu and open the Control Panel. Search for a PC repair or trouble-shooter in the search box. Open trouble-shooter, go to hardware and sound, select your printer and troubleshoot it. If all is well, follow the next steps.
Reset the Printer
After performing the above steps, try resetting the printer using the set re-setter button. First, you need to download the button, and then extract the file to run the set again setter button to fix the communication error on your printer.
If a Epson communication error still occurs on the Epson printer, it is time to get in touch with Epson technical support for additional assistance.
Being one of the best printers available in the market, it is not immune to common printing problems. You may face many problems with Brother Printer Error 49 is one of the printer errors that you may encounter with a printer. However, you can resolve Brother Printer Error 49 with simple and easy steps
How does a printer error "49" occur? How do you get rid of it?
One of the errors when printing a document is a "49.XXX" print error. This may be due to several reasons including lost data, invalid print orders, poor software, and loose cable connections. Due to the firmware being a form of error, it is difficult to pinpoint what is causing the error. The error can be quite worrisome, because if the printer error "49" occurs once,
unable to init 49 brother printer can be resolved in the following ways:
By removing dual inline memory modules and augmented input / output cards
Resolving problems with printer drivers
Solving problems with formatter board
What is Printer error 49?
While printing, sometimes you may be unable to encounter this brother machine error 49. There can be several reasons behind this error. Such as invalid data, incorrect printing commands, loose cable connections and so on. This is a firmware error so it is difficult to identify the main reasons behind the error. Also, if it happens once, it is likely to happen multiple times.
Effective solution to solve Brother Printer Error 49:
If you have this DIMM and enhanced input-output cards in your printer, removing these will resolve Brother Printer Error 49 in most cases. Removed, restart your printer and see if the error occurs. If not, put the card back one by one, and replace the corrupt one or call the Brother Customer Care Service Number.
And then, access it by rotating it to the right side of the printer.
Now, unplug all power cords and cable connections from the Brother printer device.
Grab the cover of the Brother Printer device and rotate it backwards until it stops.
And then, remove the cover by opening the screws.
Next, remove the dual inline memory modules placed within the antistatic package.
Place the DIMM against the back edge and check if all its slots are open. If not, change it.
After replacing the DIMM, follow the above steps in reverse order to re-install it.
Fix The Printer Driver Issues
The drivers are specifically designed to provide instructions to the printer for smooth functioning. If the driver is corrupted or replaced, many other problems may appear during use. Go to the control panel. Find the brother printer driver and check the status of the driver. You will find that the settings of the driver find the correct setting from the web and then make the necessary changes.
Fix Your Printer formatter Board
In the case of completing all the steps to solve the problem, you may have your printer formatter board malfunction. This is a large clip found inside the printer. The main objective of the board is to process the information and direct it to the appropriate component. If the experienced board is corrupted or broken, you may encounter this error.
Are you looking for a solution for your Canon printer error 5100? See this post to troubleshoot your Canon printer error
Canon is the most trusted brand for printers. Canon printers are purchased and used for home and office use by millions of people worldwide. Its printers are equipped with the best technologies. Printers built for office and home use are bundled with loads of features. Like any other printer or machine, sometimes you may have errors or problems with your Canon printer. The Canon Printer Error Code 5100 is one of those errors that is common and reported by many users worldwide.
Canon Printer Error 5100: Problem Overview
The Canon Support Code 5100 starts showing on the computer screen for various reasons. This can be easily solved by some troubleshooting steps. We will give you all possible reasons and solutions to fix this error very easy. You will be able to fix it yourself, just by reading and following the guide.
Which type of Canon printer has this problem?
Canon printer error code 5100 is the problem with most Canon printers. As we talk specifically about which type of printer is in Canon error code 5100, we can easily say according to our research that almost all types of printers have this problem but Canon All-in-One Inkjet Printer (Multifunction printers) have this problem mostly. There are other types of printers that run into this error such as the occasional Canon Professional Inkjet Printer, Canon Photo Inkjet Printer and Megatank Inkjet Printer.
Which Canon printer model has this problem?
As I have explained, most all-in-one printers (multifunction printers) have this error problem, but a specific model series mostly has this problem. It has been observed that PIXMA model series printers mostly encounter Canon printer error 5100. There are some printer models for which users often seek solutions to fix the Canon printer Error 5100. You will also be able to solve the problem for all these listed models and other models.
E410
IP2770
MP258
MX410
E500
IP2772
MP280
MX430
E510
IP2870
MP287
MX432
E610
IX6560
MP450
MX439
G2000
JX210P
MP470
MX452
IP1300
MG2570
MP490
MX472
IP1700
MG4250
MP600
MX490
IP1800
MP145
MX310
MX492
IP1880
MP160
MX340
MX497
IP1900
MP230
MX360
MX535
IP1980
MP237
MX377
MX870
IP2700
MP250
MX397
MX922
Solution: Canon Printer Error 5100
Let's hope to solve Canon printer error 5100. But before we start we need to understand what position you are stuck in such as if you have just bought a printer and you get this error 5100 when setting it up for the first time. This can only mean that you have left some protective material or tape inside the printer. This may be the most obvious reason for showing Canon printer error code 5100.
In this situation you just need to open the paper output cover and make sure that no protective material or tape is still attached to the ink cartridge holder. Now just close the printer paper output cover as it was before and this error has been fixed or not. If you are still receiving this error message, follow the step by step guide below to fix it. The Canon Error 5100 is basically just cartridge-related error.
Step-by-step guide to fix Canon printer error 5100
If your printer was running fine and you suddenly encountered this error, follow the troubleshooting steps below to fix the Canon printer error 5100
Check for paper jam inside the printer
Check printer cartridge fittings
Reset printer
Clean dust inside the printer
Clean the print bar / encoder
Look for obstruction or obstruction
Reset inkset
Check for paper jam inside the printer
If you were printing something and the Canon printer error 5100 showed up while printing, it is possible that the paper might get jammed. You need to clean the paper jam inside the printer.
First, check the paper jam in the sheet feeder tray. If you see any paper, gently take out the paper with both hands, otherwise the paper may burst.
Open printer output cover and make sure no piece of paper is inside.
Open the printer back panel and check if the paper is trapped inside.
Now load the paper again in the feeder tray
Back on the power on and turn on the printer, if the paper jam is still inside then it will come out automatically.
Check Printer Cartridge Fitting –
The ink cartridge inside the printer can cause a Canon printer error 5100. Sometimes improperly set the printer to prevent the printer from working properly and this may trigger an error 5100. You need to properly rerun the printer cartridge to resolve this error. To resume the cartridge, place your printer on the steps below.
Open the front panel, as you open the front panel cartridge will automatically move and close at the replacement position. Some Canon models are in the middle of the printer in the replacement position and in some, it is to the right of the printer. If in your printer, the replacement position is in the right side of the printer, then a separate cartridge cover will open. Now turn off the printer.
Once the cartridge holder stops at the replacement position, press the cartridge down until it is clicked.
Now you can remove the cartridge.
Now re-set the cartridge in place again and make sure it is properly remodeled.
Close the front cover and if it is checked.
Reset The Printer –
If you are getting an error message, then resetting the printer is one of the easiest steps to get rid of the error. Sometimes the printer needs to be reset after prolonged use. This may be needed after heavy work done by the printer. Any invalid buffer data is cleared when we reset the printer. It also resets sensors that may be stuck in special mode. Whenever you get stuck with some printer error you should try to reset the printer. To reset the printer, follow the steps below.
Turn off the power of the printer with the power button. Some models are not available in the power button.
Disconnect the power cord and data cable from the printer.
Wait for 10 minutes and plug it back in.
Now turn on the printer again.
Clean Dust Inside The Printer –
If we do not keep our printer clean and away from dust, debris and ink, it can trigger a 5100 error. Cleaning your printer can fix the error. You should try to clean your printer periodically. To clean the printer, first turn it off.
Take a little dump cloth and clean the outside of the printer. Rub lint-free cloth and alcohol to clean the inner side, use with a gentle hand. Do not force any hardware. If you wish, you can use a vacuum cleaner or air can to clean by hand.
Clean The Printing Strip/Encoder –
The printing strip is a transparent plastic material inside the printer that is just behind the drive belt and cartridge holder. It is transparent and plays an important role in printing. It communicates with the printer head. If it is dirty, it can also be a Canon printer error 5100.
Check whether this printing strip is clean or not. If it is a stain, clean it. To clean it you need a cotton swab and rubbing alcohol. Moisten a cotton swab with alcohol and gently wipe the encoder film. Do not touch it with your hand and change the swab repeatedly if it is dirty. Now if your encoder film is cleaned then close the output cover and turn on the printer. Check if the error has been resolved.
Look For Obstacle Or Obstruction –
Any obstruction that may prevent or prevent the movement of cartridges in its passage may result in a printer error 5100. Watch for any obstruction that may be en route to the cartridge. If you get any clear.
Reset Ink Absorber –
The ink absorber is for absorbing ink in the printer. Sometimes ink absorbers may cause printer error. Therefore, we only need to reset the ink absorber. To reset the ink absorber, you need to press and hold the power button, while reconnecting the power cord by pressing the power button. As soon as the printer is powered, then release the power button, pause for 5 seconds and press the power button again.
Tips to avoid Canon printer error 5100 and other issues
Your printer needs maintenance from time to time, as it needs another device to get out of it and it runs it error-free.
Keep your printer clean. Always check for dust, debris and ink stains if it is found to be clean at certain intervals.
Always use genuine ink cartridges.
Clean printer head occasionally to get the best quality print.
Always use paper of the right size and thickness.
Contact Canon Printer Support
The above steps should fix Canon Printer Error 5100. If your problem is not solved by following the above steps, you can take help of Canon printer support. Canon provides service for its products that are free for the first year after purchase. It also provides customer support to deal with technical issues such as Canon printer error.
Conclusion:
Hopefully, this post helps you troubleshoot Canon Printer Error 5100. We have explained all the solutions in detail so that you can fix the problem. Let's know, how useful was this post to solve your problem?
